If you have a folding buffer tube and brace on an AR pistol do you measure from the rear of the receiver or the end of the buffer tube?
Posted Jun 6, 2022, 6:06 AM UTC
510
Posted Jun 6, 2022, 6:06 AM UTC
i always measure from the base to the tip
I prefer the internal measurement. Most accurate with a bore snake until it can't go in any further
This time I get to choose where the base is though.
I always start at the taint
[removed]
Folded position
Typically with the stock unfolded, but there may be more restrictive state or local laws.
It's not a stock. With rifles you measure with stock fully extended, but not so with pistols and braces
Just like bloody rimhole said. But LOP is measured with brace fully extended to middle of trigger. Law folders add length so you might need one of those plug things they sell on SB’s website to restrict LOP.
Pistols are measured in the shortest operational condition.
Folded buffer tube still allows the firearm to discharge at least 1 round which qualifies as functional.
Rifles are measured in the longest operational condition.
If you look at something like the sub2k by keltec the barrel actually removes itself from the receiver/bolt rendering it inoperable when folded.