r/shroomers•
Deszip

Obvious Problem with Complex Solution. Assistance Needed.

Alright. So my grain spawn that already has mycelium growing in it appears to be drying out very quickly and I can't determine why.

My first spawn attempt didn't have this problem.

Now I have done some stuff differently this time.

First attempt: Large holes for poly fill with injection ports. Injected spores. Mixed results, lost most of it to contam. Attempted to fruit, got trych, sad days.

Second attempt: Small holes with micropose tape and poly fill. Grain to grain transfer. No contam thus far. (Been about 2 weeks.)

The grain appears to be drying out this time. Before only the top layer seems to get dry but this time it's dry about half way down the jar. And the mycelium appears to be struggling with the lack of moisture.

Now, I could attempt to inject distilled water. I did it on the first attempt with mixed results. But I was hoping someone might have a better solution.

TLDR: Dry grain spawn in jars. Need advice.

Posted Jun 14, 2022, 6:31 PM UTC

119
CharlyRSA•

How did you prepare the grain?

Pictures?

1
DeszipOP•

I used a pressure cooker at 15psi. I'm not home ATM to get pictures. But it's definitely much dryer than it should be in a gradient. Wettest at bottom dryest at the top.

EDIT: I guess I could give a less useless answer than that lol.

I soaked the grain in distilled water for about 12-16 hours. I use distilled because our tap water has enough chlorine in it to make it taste like a swimming pool (not an exaggeration)

I layed the grain onto some paper towels and let them sit for a while before putting them in jars. They were still wet when I jarred them.

Then I sterilized it with a pressure cooker for 2 hours at 15psi.

1
CharlyRSA•

That's how you STERILIZED the jars, but how did you prepare the grain for the jars?

1
DeszipOP•

Yea I realized that after I sent it. I am a dumb dumb I know. I edited my post.

1
CharlyRSA•

No problem buddy, I read the edit, hey what grain did you use??

Soaking only works great but only for some types of grain.

1
mush_gi •

Correctly prepared grains should be dry on the outside. There should not be any visible moisture.

1
DeszipOP•

The mycelium seems to explode in the wet areas and seems to be dying in the dry areas. So this doesn't feel right?

1
mush_gi •

There is no pics So im just guessing. But no, grains aren't supposed to be soaking wet, all the moisture should be inside not outside them.

1
DeszipOP•

Oh that's what you meant. I layed them out before jarring them. And the water is internal yes. But you can visibly tell the grains on top are dry. I would add pictures when I get home, but don't think I can retroactively add pictures to a post.

1
O-Stabbo•

Considered flipping the jar over? Let gravity redistribute any moisture.

1