higgimonsterASE Master L1•

Fuckin GM bearings, man.

8
techieman33•

Ford uses the same style unfortunately.

4
higgimonsterASE Master L1•

Your right. But I wouldn't say unfortunately. Those things make me money!

5
SuperStepsideOP95 silverado 6.0 turbo project•

Came off a chevy silverado fleet truck. I wouldve fired the driver for letting it get that bad. I wouldnt want him driving my trucks around like that.

7
agravain•

i did work on a small fleet for an electrical repair place back in the day...one time the owner brings in a truck making a horrible grinding noise (brakes were gone)

he tells me he noticed it when he had to move some of the trucks around in the yard..so he asks the guy who drives the truck why he didnt tell him that brakes had been making noise?

they guy says "vehicle maintenance is your problem-not mine" he said he fired the guy on the spot

12
SuperStepsideOP95 silverado 6.0 turbo project•

Thumbs up to that owner.

7
vegetaman•

Indeed.

2
levman74•

I once had a 70s Ford truck come in with squealing brakes, the pads were gone and the caliper had worn the disc away until just the rotor fins were left on the outside...Amazing that it even stopped.

2
[deleted]•

[deleted]

3
SuperStepsideOP95 silverado 6.0 turbo project•

Ive seen that quite a few times actually. The worst was when the rotor fins ripped the caliper piston out and started leaking fluid. The customer brought it in when all the brake fluid leaked out. Amazing.

2
qckk•

wouldn't they have no brakes at all in that case? if so, how could they have driven the car to the shop?

2
SuperStepsideOP95 silverado 6.0 turbo project•

Very slowly I guess. They mustve had just enough to get to the shop. They brought it in cause the brake pedal was starting to go to the floor. They didnt know why.

1
silvad702ASE Certified Monkey•

It was the ABS sensor all along! :)

5
jaynone•

Funny story... I had a rental truck with an ABS light that just wouldn't go off. The rental company say "oh, just ignore it". I had it in the rental companies garage a week later and mentioned the abs light, and some grease on the wheel hubs on the steer axle. Truck needed two new front wheel hubs!

Distance between picking up the truck and the garage that replaced the hubs: 3000 miles!

2
TheTrollys•

What the hell is that?

3
[deleted]•

Looks like a wheel bearing minus the ball bearings?

4
Nightshade3312NATEF Certified•

Bearings?! We don' need no stinkin' bearings!

2
sunburnedaz98 K1500 w/300,000mi•

What did he do to destroy the bearings. Is that from a 99+ truck?

1
SuperStepsideOP95 silverado 6.0 turbo project•

Yea a 99+ truck. Thats what happens when you continue to drive the truck on bad bearings. The ball bearings inside basically crush themselves to powder till theres no more ball bearings left.

3
sunburnedaz98 K1500 w/300,000mi•

I still don't know how they fudged up the design of the bearings, the ones in the 88-98 4x4 are similar and they are bullet proof.

2
SuperStepsideOP95 silverado 6.0 turbo project•

The newer the car the more shittier the build quality is gonna be.

8
ant_upvotes•

exactly, and with bears it just takes the littlest defect to start the wear and then it gets worse exponentially.

1
dijielet's play GM 3100 head gasket job!•

I'm going home to check my bearings right now! heh. :)

1