Front Strut Replacement

Got a 2012 Mazdaspeed 3 with just under 100k miles (I'm in Canada so I'm at 153,000kms). I'm the original owner, still on the original struts. I think its time to swap them but not sure what to get on them. I replaced the rears about a year ago with Bilstein B6 shocks, replaced them when my top shock mount broke.

This is my daily driver and don't need anything crazy on it, I just want to keep the car running as smooth as possible as long as possible. I would like to do the Bilstein B6 in the fronts but it's the most expensive option. Other option would be just go OEM or get the Koni STR.T which are on sale on Tire Rack (even after US to CDN conversion it would cost half the price of Bilstein from RockAuto). So note sure which would be the best option and looking for input especially on the koni.

I don't want to lower the car (I drive this thing in the winter in deep snow so lowering wouldn't help that), don't want coilovers, don't want to replace the coils as they are fine.

Posted Jul 4, 2022, 11:45 PM UTC

15
Redh0r5e•

I have those konis on mine all around and like them. If I were you I'd run the same shock front and rear so the valving and everything matches. You'll have a better ride that way too.

4
therightpedal•

Agree with the other comment - stick with the same strut. Bilsteins are more expensive but you get what you pay for, they won't blow out as many people have commented about konis (they're only great if they don't break), plus super warranty with Billy's. Quality comes at a price.

2
res_mps3•

I am running the koni str.t and eibach lowering springs since November 2019 and am very satisfied with them.

For two years I also drove to/from Newark NJ (which has super horrible streets) and none are leaking at all even after countless potholes.

I think if you’re looking for a daily set up that is good enough the koni str.t are worth it. Save a bunch of money that you can use on other mods.

3
Toucanizzle•

Good ol' Newark streets, lol I'm thinking about replacing my stock struts so i might follow your set up 👍

1
Rotaryfan•

I'm running Bilstein B8's with SWIFT spec R springs. It's a great combo.

I do, however, have a bit of left/right play in the middle of my front right strut and finding a replacement is turning into a pain in the ass, now that ESSEX distributors (Canada) only sells struts in pairs.

​

The Bilstein's are a huge improvement over the stock struts/springs, and I'll recommend the SWIFT springs to anyone. I will not ever recommend Megan racing springs, which are hot garbage, and were on the car when I bought it.

2