Slow network speeds to internet, but fast on LAN?

Solved!

Hi all, I have a problem that's stumping me that I was hoping to ask for advice on.

My network is currently a Spectrum modem connected to a Netgear R6400v2 with two desktop computers connected by Cat5e. Computer 1 is currently getting 10 Mb/s connection speeds when accessing the internet, but 1000 Mb/s connection speeds when transferring files to computer 2. Computer 2 is getting 300 Mb/s when accessing the internet, and 1000 Mb/s connection speeds when transferring files to computer 1.

Computer 1 is using the network adapter which comes with the Asus P8P67 motherboard, which I believe to be a Realtek 8111E.

Diagnostics attempted:

  • Rebooted computer 1
  • Rebooted router
  • Rebooted modem
  • Reinstalled network adapter drivers on computer 1
  • Swapped router ports between computer 1 and computer 2
  • Swapped cables between computer 1 and computer 2
  • Connected computer 1 directly to modem
  • Uninstalled any VPN program which had a virtual network adapter
  • Fiddled with ethernet adapter settings, including forcing speed to 1 Gb/s full duplex
  • Used W10 "Reset Network Settings" option
  • Booted in W10 safe mode with networking

So far nothing seems to fix the problem. The only other factor that I can think of is that the problem has occurred immediately after a 300 mile move, where the computer was stored in a truck. I can't rule out physical damage from the move, so I intend to borrow a PCIe NIC to see if things improve, but I've tried everything else I can think of at this point.

Does this sound familiar to anyone? Happy to try anything short of a reformat at this point. Thanks

EDIT: Further diagnostics revealed that a) my wired laptop was having the same issue, and b) Steam downloads were happening at 150 Mb/s (a very reasonable speed given my ISP), so the issue was almost certainly not hardware. Further googling revealed this superuser page, which was basically my exact problem. Following the solution of turning on TCP autotuning via

netsh int tcp set global autotuninglevel=normal    

solved the problem. I'm now getting full Speed Test download speeds on each computer.

Posted Jul 7, 2022, 4:24 AM UTC · edited

30

No comments yet

Nobody commented on this post, or the comments weren't captured.