phpfictionOP•

Few days ago I was on ebay searching the replacement of my SD1, I found a bid of SD2 as Parts and I won it, given the damage I think I could fix it. The damage listed was:

  • Hinges stiff
  • Left broken digitizer
  • Camera not working (Camera working indeed)

How I fixed, maybe can work with you?

When I received i start fixing the common problem of Hinges, my solution in SD1 before was use WD-40 and compressed air can, it worked before to make smooth the close, in this case because the sound like grinding salt, I used gear grease oil (printer) i applied a few drops letting the oil entering the hinges (both) and opened and closed gently almost 300 times between day until clicked, the hinges placed correctly after this and I can close and open without trouble.

  • The digitizer broken it's a problem, but im very optimistic of Loctite 495, I tapped the glass which the glue was not involved and let drop 3 drops until bonding was done and applied a micro line in the cracked lines and rubbed with isopropyl alcohol to clean the excelent, After this a few color black to camouflage the repair.

I hope this can work if you have a similar scenario.

6
iAdden•

Bruh what?

1
phpfictionOP•

I did a little explanation, next time I will record all, more steps was involved but that was a fast explanation.

For example the hinges next day I needed to open and close the surface faster to make the gears get hot and make friction to eliminate the sound, imagine to recreate that I was closing like hand fan.

At this moment close even better, so smooth.

1
themooingpig•

Can you share more details about what you did for the cracks on the screen?

2
phpfictionOP•

Shure,

This is not the first time that I fix cracked screens, when you have one the first step it's brush all the shattered fragments with a brush until all they fall, the seconds step is create a area that you are confident the glue will cure without affect the other components, in this case I had the glass between hinges and upper screen.

For the glass between hinges you need tape the area when the drops of glue will cure, in this case in the picture I did a square for the 3 drops of glue and when the glue cured I removed the tape.

For the lines of shattered digitizer, again brush those lines and with the glue apply a very thin line to let the glue filter between cracks and in the next 5 seconds clean with isopropyl alcohol to remove the external glue in the digitizer, if the glue gets dry and not removes, with something thin scrape the dry glue and clean with isopropyl alcohol.

And for the borders of the digitizer I applied more glue because there was the point of pressure that caused the fragmentation, in my case I counted 3, near speaker, near center curved edge and in the bottom of glass.

1