VGA and Boot light on motherboard. Not booting

Open | Hardware

Hellllo everyone I’m in need of some assistance!

Starting off with my specs:

CPU: i7 12700kf

RAM: 32gb (4x8) Corsair Vengeance RGB PRO

Mobo: Asus ROG Strix Z690-A DDR4

GPU: MSI VENTUS 3X RTX 3080

PSU: Corsair RM750X

STORAGE: Adata XPG M.2 (1tb), Kingston SSD (256gb), 2x WD Blue 1tb HDD

CASE: Phanteks P600S

Computer was working fine, no major updates (that I remember of) when all of a sudden my monitor screen went black with no warning. All of my PC lights were still on, so I thought the screen only turned off due to inactivity.

I Tried clicking my peripherals to switch the screen back on, to no avail. I looked at my PC and saw the VGA debug LED on. I thought my GPU was cooked, so I sent it to MSI for them to have a look at it and they sent it back with proof showing that it was still working fine. I tested this myself, putting the GPU into another PC, and sure enough, it worked fine!

Then I moved onto the motherboard, sending it back to ASUS for RMA, to which they said they “fixed” it and sent it back to me. Again, same issue.

Moving onto the CPU, I bought another CPU (another 12700kf) to see if my old one was faulty. Again, same issue.

My ram works fine too, with all 32gb being recognised, and with me trying every permutation of ram stick and ram channel possible.

I tried booting without my SSD installed, and same problem occurs.

What’s more is that now both the BOOT LED and the VGA LED light up, with all the RGB and fans spinning constantly.

  • I’ve tried to reset the CMOS multiple times
  • I’ve tried to use BIOS flashback, but the LED on the back stays solid, indicating an issue
  • The monitor cables work fine, as if/when the computer does turn on, the display seems normal

I’m so lost. I’ve spent months trying to fix this issue with no solutions found.

Occasionally, after reassembling and reinstalling parts, the computer will turn on and boot normally and work fine (albeit a bit slowly) for ~1hr, before randomly black screening again.

Whenever it does boot, event viewer shows no errors and everything seems to be normal.

I''ve literally scoured the internet for solutions, trying pretty much everything known to man, including:

- Resetting CMOS

- Reseating and testing RAM sticks individually

- Reattaching all PSU cables

- Reinstalling GPU (only have one main PCI-E slot on mobo, so no other slots to put in)

- Hard restarting PC multiple times

- Changing display cables

- Changing monitors

edit: I don't have any other spare parts except two 12700kf’s to test if other components are faulty

Posted Sep 3, 2022, 5:26 AM UTC

10

No comments yet

Nobody commented on this post, or the comments weren't captured.