Changing Routers - How hard is it?

Just got a new router (BGW320-500 ATT Fiber) but still have my old router going with my old internet provider. I wish to switch my HA over. What is the easiest way?

  1. "internal_url: "http://192.168.0.23:8123" appears in my config but I think it is optional. I guess I just comment that out.
  2. Under Settings->System->Network there is WLP2S0 and EN01 that have static addresses. It has an option to choose DHCP (automatic). I'm supposing DHCP would be best.

Is there anything else I might need to change? (besides my gazillion google-mini's spread throughout the house, egads!)

I'm just posting this as a sanity check before I wack my system for a week. Heh. Any advice appreciated!

:)

Posted Sep 14, 2022, 2:21 AM UTC

03
junktrunk909•

You shouldn't need to change anything on any of your WiFi devices when you change a router. Just make sure the router uses the same LAN address scheme (in your case 192.168.0.x with whatever subnet mask) and same SSID name(s)/password(s). Everything should connect automatically just fine.

You want to keep your static IP assignment on any devices that already have one. Just be sure to create those as DHCP reservations with the appropriate MAC addresses in the new router so it doesn't assign those IPs to some other device also. That's a tough one to diagnose when it happens so don't forget to do this step!

2
sickofdefaultsubs•

Unless the new router uses a different IP address range (eg. 192.168.0.x vs of 192.168.1.x) you probably don't need to change anything. If it does use a different one, you could probably save yourself some heartache by configuring the new router to match the old. This is likely under dhcp and you'll probably want the gateway address to be 192.168.0.1 and subnet mask to 255.255.255.0 or possibly specified as 192.168.0.0/24

You can also set it to broadcast the same wifi name & password as the old one to save you having to reconnect all the devices. You're looking for something like wireless settings, wifi, or possibly WLAN. The name will possibly be called ssid and the password might be called key or passphrase. You'll likely want to set the encryption type to wpa2. If it has an authentication method area with something like EAP leave it blank or select open.

2

If you set static IPs on your devices you may be ok to not do anything, otherwise copy the static IPs to the new router. Need to make sure the new router uses 192.168.0.x also

1