Pilot Parallel Cartridges

Has anyone used parallel cartridges with a pilot metropolitan or vanishing point? Did you have issues or malfunctions? I have been getting conflicting information that it is ok and it is not and I was wondering what everyone’s experiences have been? Thanks!

Posted Oct 25, 2022, 3:13 PM UTC

816
cjbmonster•

I've used empty cartridges from the mixable colors in my Kakuno and the cartridge fits just fine. It didn't have any of the original ink in it, though. The ball berring in there is kind of nice.

4
iggs44OP•

Thank you for sharing your experience!

3
LizMEF•

I have reviewed the following three Pilot Mixable Colour (aka inks for Parallels) inks using my Pilot Prera with a Penmanship EF nib. Links are to the YouTube reviews.

Yellow

Pink

Blue-Black

They take eternity to dry on FP-friendly papers. I suspect they'd behave better on paper (dry time, feathering / bleed, etc.) if they were diluted a bit (I tried this with one of them, and it did behave better). In the pen, they behave well. See the notes under the video for cleaning and other comments about the ink.

3
LizMEF•

Oh, and I plan to review all of these "mixable colour" inks, but when is up to the voting in my poll - see video description for a link.

1
LizMEF•

Sorry, replying again... Given how the ink behaved in my Prera, which uses the same nib style as the Metro and several other Pilot steel-nib pens, I have to believe it will be just fine in your Metro.

As long as your VP (I own 2 and a Decimo) seals reasonably well (it seems sometimes they don't, but mine all do), then I think the ink will be fine there, too. But if your VP is one that doesn't seal well (as in, after a day or two unused, it hard starts because it dried a bit), then these inks may not perform well there because they are very saturated, and heavily saturated inks tend to suffer flow problems from evaporation faster than less-saturated inks. (If you dilute the ink, however, that won't likely be (as much of?) a problem.)

FWIW! Happy scribbling! :D

2
iggs44OP•

Thank you so much for both of your comments. My VP seems to seal well and I want to reiterate how informative your posts, videos, and suggestions are. Happy Writing!

3
LizMEF•

You're very welcome! If you decide to try out the Mixable Colour inks, I hope you enjoy them. (And I agree with u/cjbmonster - the ball bearing in the cartridge is quite nice - I keep the empties for re-use because of that ball.)

2
paradoxmoSanta's Elf•

It works. However the Mixable inks are a lot wetter than standard fountain pen inks, and will quickly soak through any paper even “FP friendly” paper like Tomoe River. If you’re fine with that, use away!

2
iggs44OP•

Thank you!

2
kiiroaka•

I love Pilot carts so much that I wish it were the standard. I buy Parallel Mixable carts just for the steel ball in the tube, which helps when I use high dye load, heavier flow, inks, so there is no air-locking.

Parallel Turquoise is the one Turquoise ink I like. Most Blue Turquoise inks are too light and pretty much all look the same; "they're all the bloody same."

I prefer to believe that the Parallel inks are pigment inks. [edit] a fellow member has proven I am misguided. They are dye based ink. [/edit] Regardless of how long it remains in the cart, especially if the cart is near empty, it never clumps up, gets heavier, separates. "It's Good to the Last Drop."

There is No Shading, No Sheen, No Shimmer, No Water Resistance.

They're wet inks so there may be a little more ghosting and bleed-through than with some other inks. Flow is excellent, doesn't clog a Pilot pen, dry quickly. Hash mark smear is under 12mm/0.5" on Rhodia Dot pad, which puts them in the average range, not a gusher, but not dry, either.

I love Parallel Violet, which is very close to an Aubergine.

No, I've never had any problems with the ink in either my Kakuno or Metro, both of which sport <M> Stub nibs.

https://www.fountainpennetwork.com/forum/topic/195110-pilot-parallel-pen-ink-in-other-pens/

1
LizMEF•

I prefer to believe that the Parallel inks are pigment inks. ... it never clumps up, gets heavier, separates. ... There is ... No Water Resistance.

Erm, pigment inks are sort of the opposite of the attributes I left - they do have water resistance, they can separate out, and can clump....

With no water-resistance, the mixable colour inks are almost certainly dye-based.

2
kiiroaka•

You're right. But, to me, they're more saturated than other water based dye inks, at least my two favourite colours, so far, of Turquoise and Violet.

Hmmm. I think I should go back and strike out what I said about their being pigment inks? Reminds me of my neighbour complaining that a dye based ink I had given him was harder to wash off his hands than his pigment inks. :D

Their 'never clumping up' may be because of the steel ball which intermittently agitates the ink, instead of just the water content evaporating within the tube.

2
LizMEF•

But, to me, they're more saturated than other water based dye inks

Oh yes, they are definitely more saturated than usual, but they're not the only dye-based inks to be heavily saturated. :)

I don't know for sure one way or the other, I'm guessing based on the following:

  • Dye is heavily preferred for FP ink - easier to deal with and less risk to the pen
  • Pigment inks are always (as far as I've heard) water resistant
  • Dye-based inks are sometimes water resistant, but usually not

While there are pigments that aren't water resistant, I've never heard of one being used in a FP ink - which doesn't mean they aren't, just that I haven't heard about it. FWIW.

1
archer-arts:Pilot:•

Ultramarine is used in a boutique ink I got from a street vendor in Arizona. It seems to stain the liquid while also proving granulation in the ink. A really cool effect

2
Sea_Hawk_Sailors:Sailor:•

If it's really the steel ball you're after, you can buy remarkably small ball bearings for cheap.

2
kiiroaka•

Too much trouble. I tried a few small ball bearings, and springs, and they rusted. I tried some plastic balls and they just floated, for the most part. (The plastic balls in most Int'l Std. Carts. are not all that effective.) I even tried finding some glass balls at the local WalMart and Hobby shop.

No, I'm happy with my Pilot Parallel carts and Faber-Castell Converters.

1