Cannot get my image to the borders on this iiyama pro454
imgur.com/a/iaHp50RPosted Dec 19, 2022, 1:15 PM UTC
Posted Dec 19, 2022, 1:15 PM UTC
Try reducing the resolution and start with 60Hz, after finding what max resolution that monitor supports see how high the Hz can go, also the more resolution the less Hz it will handle.
I did do this but the sides seem to be a dead zone. I cant move the picture any further to either side. It can get a bit smaller but the difference is nothing like moving or enlarging vertical.
I'm assuming here but maybe you're using an adapter and it might what's causing the problem, if you're using VGA directly maybe the monitor cable is faulty or something more technical like failing capacitors could be the issue.
Im sure the connection/resolution is fine. But what id like to know is the more technical bit haha. thanks for your help though.
Not saying this is the cause and I'm no expert myself but it's possible the monitor has failing capacitors on the deflection board or a IC is failing.
The only way to make sure is to open it and check but make sure to look up on CRT safety first, CRT's have residual high voltage inside even when they're turned off.
Have you tried other resolutions and refresh rates from Windows? I've had adapters be weird about specific resolutions, and it wasn't the monitor's fault.
Hi thanks for your reply. I have tried different resolutions and such but i dont think thats it sadly. The move option, in the monitor menu. Lets me move the window up and down but it cant get in the dead zones on the left and right sides. Same with stretch options. Was hoping for someone to know wich part of the monitor is broken.
Horizontal deflection circuit, maybe. It’s probably fixable but will take some research and investigation