-Cooki-

u/-Cooki-


r/BambuLab•

Hi guys.

I bought this plate from Aliexpress:

​

https://preview.redd.it/11gewfm04r0d1.png?width=453&format=png&auto=webp&s=842fd72105be62a36aab4438ed10a1484979373c

​

My problem is:

  • When using bambulabs "textured pei" plate my printer works like a charm.
    • It always starts the print
    • First layer is topnotch
    • Prints almost never fail
    • Prints look awesome
  • When using the carbon fiber side of that new plate ...
    • I get "Z homing failed" or "mesh calibration failed" if I dont get the first error
    • This happens 10 times back to back no matter what I try
    • I noticed that the bambulab plate is 0,6mm thick and the new one is 0,9mm thick (just like bambu
28

r/Twitter•

Help with using X

:default: Question

Hello internet people,

I never got into Twitter or X. I only see posts linked on other websites - like reddit that point to singular posts.

The main reason is: I dont understand X / Twitter !

​

Example: https://twitter.com/helldivers2

  • That is the offical helldivers 2 X account of the helldivers developers
  • I am looking at the "Posts" tab
  • The posts there are some complete GARBAGE ordering ?!?!?
    • March 13th (pinned)
    • March 5th
    • March 8th
    • Feb 16th
    • March 7th
    • March 13th
    • March 21st
    • March 12th
  • WTF ?!
  • Why are all the posts randomly displayed?
  • I thought X / Twitter is a kind of "news" aggregator
    • N
62

r/helldivers2•

From a perspective of someone who is lvl 46 general and has been playing for maaaaaaaaany hours on difficulty 7+.

​

  • Since the patch I regularly see:
    • flamethrower
      • This one is SUPER strong now.
      • Can easily kill a charger in 3/4 of a tank
      • but beware friendly fire
    • autocannon
      • This one was strong even before patch - but it requires a backpack
    • expendable rockets
      • A good solution to all high armor problems
    • arc thrower
      • Very solid. Unlimited ammo is nice.
      • Charger takes ~7-10 hits
      • but beware friendly fire
    • laser cannon (rare)
      • i find it lackluster
    • railgun (rare) *
659264

r/BambuLab•

People regularly post how much flow they can get out of their CHT / E3D nozzles. Claiming HUGE time savings.

​

However:

  • But with the standard 0.4 nozzle the ACTUAL time savings are tiny!
  • So tiny that I would say its not even worth it unless you are mass producing

​

Test:

  • I took a couple of the most downloaded models from makerworld
  • Then sliced them "Bambu PLA Basic" which has 21 flow
  • Then changed the flow to 35 and sliced again
  • Then changed the flow to 50 and sliced again
  • I also tested 0.6 and 0.8 nozzle a bit.
    • But they lose so much quality at 0.8mm especially ... thats not really something I am interested in.

​

Results:

  • The result as you
143

r/LiesOfP•
  • Most bosses - kill on 1st try
  • Some bosses 1-3 deaths (e.g. simon - the boss 10 minutes before - was 3 tries only)
  • Nameless - 50 deaths, no kill

​

Who in their right mind had the FABULOUS IDEA to ruin an almost perfect game with an endboss like this?

What the actual f ???

​

​

  • No I will NOT respec my character and use completely different weapons - my character has worked PERFECTLY the rest of the game
  • No I will NOT spend 1-2 hours learning every move of Nameless and try to "perfect parry" everything - just to beat the LAST ENEMY IN THE GAME.
    • This was not necessary for the rest of the game. This is NOT sekiro dudes ...

​

Sadly I will uninstal

131

r/Lastpass•

We recently switched to Lastpass. We have 14 people in the company. 4 of them are marked as "weak" / "very weak" (translating from german - not sure if that is the actual term).

Here is one example:

  • User A
    • Master Password Score 100
    • Result of Security test 40
    • Average Password strength 50
    • 0 empty passwords / duplicates / duplicate websites / weak passwords

​

I asked the user to check their security center and it shows me this:

​

https://preview.redd.it/8bs2wz1938dc1.png?width=997&format=png&auto=webp&s=7e6f9f5223045ca82b41404af80f10e1daff6e72

I mean ... what the actual f*** ???

​

  • No weak passwords
  • 2fa active
  • no problems at all
  • ever
415

r/synology•

Hello guys,

I got a DS420+ with strange behaviour:

  • Copying from NAS over SMB to my PC I get a transfer rate of
    • 100MB/s
  • Copying on the webinterface to/from a USB SSD attached directly to the NAS I get
    • 100-200 MB/s
  • Copying from my PC over SMB to the NAS I get
    • 0,5-1 MB/s

​

How can it be that copying to the NAS from my PC is 100x slower then reading from it? And also 100-200 times slower then writing to the NAS from an attached SSD?!

The HDDs are not broken. Because copying data from a SSD is perfectly fine at 100-200MBs written to the NAS HDDs.

​

Something must be broken in DSM I guess? Are there any settings like

"Limit SMB write data trans

10

r/synology•

Hello guys - I got a little mysterie with my Synology NASes:

The setup:

  • NAS1 -> DS420+
    • 4x 3tb
    • 10GB ram
    • This nas got the old DS920+ drives. The DSM wizard correctly identified the "upgrade" from the 920 to 420, installed the DSM and successfully converted all settings over to this NAS. Everything looks fine and works.
  • NAS2 -> DS920+
    • 4x 20tb
    • 20GB ram
  • Gigabit Network (1000mbs/full duplex)

​

The problem:

  • I want to transfer files from one NAS to the other
  • I connect the other NAS through the webinterface as CIFS or NFS folder (tried both)
  • I then start copying a large file (40gb movie)
  • I get around 120mb/s for a couple seconds
  • Then it slows down
10

r/Xreal•

This is my perfect little setup.

  • S23 + Nreals will go into DEX automatically when they are connected
  • The BT gyro mouse also automatically connects after you press any key on it (as that turns it on and then it looks for BT connection)
  • The BT gyro mouse is super cheap and almost perfect. It has buttons for up, down, left, right for selecting stuff. A dedicated "back" button. Has dedicated volume buttons. And its very precise. The only thing that doesnt work is the "right click". Luckily you only need that rarely in Dex. It even has a button to disable to gyro mouse. So in your pocket it doesnt constantly show a wobbling mouse when you walk around.
    • I added a short video. It's a bit
1530

r/Xreal•

I tested the FOV of the Xreals.

Steps:

  • Connect to S23 Ultra (dex) or steam deck or macbook
    • I tested with all these devices at 1080p output
  • Put something bright in Full screen so that you can easily see the borders of the Xreal glasses.
  • Look through the glasses on a TV you know the exact size of
    • For me thats my 42" LG OLED which is 106cm dioganally - which is 42"
  • Move backwards with the glasses on until the image inside the nreals picture perfectly matches the TV screen boundaries
  • Let your girlfriend measure your distance from TV to your forehead

​

My result:

  • at 1,25m distance the screens perfectly overlapped
  • Enter 1,22m and 42" screen size in a FOV calcul
95

r/diablo4•

I am constantly reading how bad sorc is. I can only disagree.

​

Here is a NM dungeon at +8 (lvl96 mobs) as lvl88 sorc. I usually do +3 dungeons for "max xp buff". But I just took the highest Sigil I had in my inventory to show you that its all easy peasy.

Note: I never look at sigils and their affixes. Because sorc has 3 buttons to just ignore all damage and get out of CCs - I simply dont care which affixes I get. Elites just explode as soon as I teleport to them anyways.

​

Long story short: Sorc is a lot of fun so dont listen to the crybabies. Just have fun melting demons !

​

https://reddit.com/link/14m0jd4/video/ptdu5tuqdx8b1/player

117

r/SteamDeck•

Hello fellow Steam Deck gamers,

Could you please stop discrimitaing / hating on people who like to dual-boot on the deck?

Your actions probably are the reason for people actively leaving this reddit - and in this case (see screenshot) the user even deleted his account. Even though his post was actually helpful information!

​

https://preview.redd.it/c79brye19j8b1.png?width=1067&format=png&auto=webp&v=enabled&s=07711fcef7ec662e2efa40c4786c570efb683bd2

​

Installing Windows is easy and solves a lot of problems that are unsolvable on SteamOS. Examples:

  • games with anti-cheat
  • gamepass native games
  • problems with 3rd party launchers

​

Also while SteamOS / prot

117


r/diablo4•

​

https://reddit.com/link/14e76s3/video/ng049c33c57b1/player

Frostnova + Frost Shards + Teleport Unique Chest = FUN !

​

It's good fun doing dungeons and Helltides with this build. You just teleport right into big mob packs - they are immedieately stunned for 3 seconds - you click frost nova - KABOOOOOM. The more mobs - the higher the AOE damage. Ready every 6 seconds.

​

This run was 6 levels above me. So I dont think it will change / get more difficult much more until I hit 100 ?

Is this viable at lvl 100 aswell? Is it as strong as this? Instantly desintegrate whole elite packs?

​

BTW: Works beautifully for helltides too. Mount up -> find mob packs of 10-

16