444fox

Does anyone have a copy of Siemens WCIS they could send me?

Hey, I have. A problem with routing that I'm struggling to understand. I have aweb server at one location that is connected to a Wire guard Tunnel coordinator through wg 0. I have a laptop that is also connected to the tunnel coordinator through WG one.

The tunnel coordinator has a fixed IP address. The laptop and web server do not.

Both tunnels can see the coordinator and the coordinator can communicate with both field devices.

What I want to set up is the ability to connect to the web server From the laptop.

How do I route Traffic destined for 10.1.x.x down the wg0 tunnel when it comes in from wg1

coordinator is linux mint

Laptop Configuration

[Interface]
P

Hey I have a wireguard tunnel set up as follows

Server with fireguard <---------------> Firewall <------------> Internet <------------> Remote 4g laptop

When i ping from my laptop to me sever everething goes well as i have a dynamic dns set up. BUT if i try to ping the laptop from the server i get nothing.

I have persistent keep alive turned on at 25 seconds. Im trying to avoid using tail scale, is this possible to have the tunnel bidirectional if one of the computers has to be behind nat?

Is there any way to set up a site so that site A can have a network connection to site B and C without opening a port at any of the sites,

​

I have three 4g modems and because of the way 4g modems work I can't port forward anything, only NAT works

Hey I'm trying to remote access my network from my phone and I'm trying to use wire guard server on a Gl.inet router at home. Im confused as to what the line " Local IP " should be set to to prevent conflicts.

my home ip structure is 10.14.11.xxx and i connecting from an android phone. currently its set to 10.0.0.1 but im not getting a connection

Does this look like a scam, It seems way to cheap ?

https://www.ebay.com/itm/TIG-WELDER-PRIMEWELD-TIG225X-225-Amp-IGBT-ACDC-Tig-Stick-Welder-with-Pulse-CK17/233592582816