67Matthew

Hi all, I'm 24M working in aviation as an Apprentice AME(Aircraft Maintenance Engineer) in quebec canada, and will be licensed by the end of the year. I made about 62k last year, this year should be the same or more. Since I'll be licensed by the end of year, I'll get a decent pay bump and I should be making anywhere from 80-90k next year. I enjoy the job although i travel a lot of work, about 4-5months away from home. I don't think this is something I want to do long term. Unfortunately with most AME jobs, its either night-shifts or travelling.

So I've been thinking about going to university, in Mechanical engineering(bachelors only). Ultimately my main concern, I would be taking a pretty

Hi all, I'm 24M working in aviation as an Apprentice AME, and will be licensed by the end of the year. I made about 62k last year, this year should be the same or more. Since I'll be licensed by the end of year, I'll get a decent pay bump and I should be making anywhere from 80-90k next year. I enjoy the job although i travel a lot of work, about 4-5months away from home. I don't think this is something I want to do long term. Unfortunately with most AME jobs, its either night-shifts or travelling.

So I've been thinking about going to university, in Mechanical engineering. Ultimately my main concern, which is why I'm posting here, I would be taking a pretty significant pay cut for 4yrs or

I've recently acquired a Mesa Mark v 90w and a Mojotone British 800 50w (jcm800 clone). I would like to slave the two amps together to see how it sounds, the mesa has a slave out and an fx loop and my british 800 has an fx loop from mojotone installed. To my knowledge, fx loop in and out levels are low and safe, the fx loop then brings them back up to high voltages for the power amp. So I'll obviously have a speaker load on both amps, but is there any chance of damaging something by running the mark v fx out to the british 800 fx in? For speaker loads, i would have a 1x12 65w connected to the mark v (nothing will play through it) and the british 800 into my captor x (can handle 100watts).