AfterShock

Incoming website refresh in progress...

Sorry if this has been asked before (I did search) but as the title suggests, looking to do a new sim racing build for a buddy. Going AM5 7800X3D (when released in February) and looking at options for a GPU to drive 3x 27" 1080p monitors. Any insight is Welcome but lets keep it all positive as I've read some threads that got pretty negative. Thanks for taking the time to read:

Current options I'm looking at: Used 3080 ti New 4070 ti Used 3090 Possibly, used 3090 ti

So I'm re-evaluating my home storage setup, let's start with my usecase:

S3 Object storage similar to Google Drive for the purpose of mounting and streaming media remotely. This way I can have a lesser powerful server at my parents place and just mount the buckets they care about for the content they watch.

I've searched a few days on here and a single node CEPH instance doesn't seem too recommended but that was from posts years ago. Not sure if anything has changed. I do have a list of some decent enough hardware to work worth from my sys admin days. I'll list it below to see if it helps with suggestions on what to run for a storage solution.

Equipment: 16 bay (3.5") SuperMicro Server

Today I have a Cisco Nexus N9K-C9372TX V01 48 x 10TGB & 6 x 40GB QSFP+ L3/Leaf switch for immediate sale. I run one as the core switch in my home lab (which if there's enough interest I could also part with, lmk). Please note that in their current configuration it is meant to be mounted at the back of a rack. Airflow and fans are back to front. If you want to front mount it in order to look at the blinky lights, ebay is your best bet and they are burgundy in color compared to the blue ones pictured. You'll need 4 fans and compatible PSU's. It does come with (dual 650w) PSU's. Switch is in good condition overall, it does have some typical DC scuffs and scratches on the exterior from gener

So like most, I was late to the game requesting an official LGA 1700 bracket from NZXT for my AIO. So I ordered the Themaltake bracket and installed that, no issues however... My NZXT bracket showed up today. With no real immediate need for it, I thought of an idea. Why not create an Indian leg race or LGA 1700 relay. Meaning I'll send someone my LGA 1700 bracket I got from NZXT in exchange for say $10. The Thermal take brackets all in was $23 and change. I'll mail the breaker to someone that has requested one with proof from NZXT. When they eventually get their bracket they pass it on to the next user for $5 or whatever postage will be to the 3rd person in li

Today I have 2x Cisco Nexus N9K-C9372TX V01 48 x 10TGB & 6 x 40GB QSFP+ L3/Leaf switches for immediate sale. I run one as the core switch in my home lab. Please not that in their current configuration they are meant to be mounted at the back of a rack. Airflow and fans are back to front. If you want to front mount it in order to look at the blinky lights, I do have the opposite direction (dual 650w) PSU's and fans to switch it, however it'll be a $150+ option to the sale price. Both switches are in good condition overall, one does have some scuffs and scratches on the exterior from general DC moving around. Both come with inner rails but only 1 comes with outer rails (I'm still looking f

As title states, I'm looking to pick up 2x G3 Instants for a client project. I understand the market as I've been watching and waiting for some time. Just looking for a fair deal for everyone. PM me what you have and please no Chats. Thanks.

Alright, the players in the game for my home network are a newly installed UDM-Pro and a Cisco Nexus 9k 9372 switch. (This will be a long mobile posts so I apologize in advance) As it sits now I'm utilizing the the native vlan on the UDM-P for my LAN and an IoT network on vlan 10. The trunk port on the UDM-P (all Unifi ports are trunk out of the box) is connecting via DAC to port eth 1/50. At this time everything on my native vlan is using port 1/50 as an access port. I know access ports only carry one vlan, so we need to make it a trunk port.

Long story short when I do so, my vlan 2 ports on the Cisco switch for my IoT stuff can get out just fine, however my native vlan 1 devices (tha

Woke up to a giant backlog in nzbget with messages complaining about 502 Connection errors on all of the Newdemon sites. I logged into my account and it is active and up to date. Was just seeing if anyone else is experiencing the same thing. Thanks.

Resolution: Reached out to customer support via a ticket, they stated they needed to re-sync my account and to wait 10 minutes. Problem resolved.

Preface I did search and read a lot of posts before making this one.

I have obtained a C9372TX Cisco switch and understand that I can utilize the 6 QSFP ports for 10Gig ports. I have purchased this along with a pair of these. I've seen other posts instructing to set the interface speed to 10000 & no shut. I've also seen it suggested to break the interface out but the examples I've seen don't seem to apply to the L3 switch I am inquiring about in this post. I did do the show interface ethernet 1/50 transceiver command and it states the transceiver isn't supported. Just looking for advice and particul

I'm sorry if this has been asked before, I promise I did search.

A relative has CL fiber and the infamous c3000Z Modem/router. Setting up a web server, it can be accessed remotely fine but on LAN the nslookup fails and connections timeout attempting to resolve mydomain.ltd Most have networking device I've used in the past have NAT loopback or some sort fo redirect. I've tried everything from the DNS host mappings to all the application and port forward rules, to even moving the hosting server outside to a DMZ. Same results locally.

Network setup is C3000Z to a dummy 8 port switch to said web server. External access isn't an issue, just when on the LAN. There is a wireless AP R8500

8 bay SFF Gen 8 DL380p HP Proliant server and 10G switch for sale.

TimeStamp

• 2x Intel(R) Xeon(R) CPU E5-2670 v2 @ 3.00GHz
• ProLiant DL360p Gen8 8 bay SFF (2.5" Drives)
• 120 GB ECC RAM x 16384MB Mainly 8GB PC3-14900R DDR3
• HPE FlexFabric 4-port GB Adapter
• Smart Array P420i Controller
• iLo Advanced Registered
• Redundant 460W PSU's
• Bezel, NO Key
• NO Power Cords
• NO Rails

Added Bonus, 8 10K 600gb SAS drives and caddys to get you up and running.

I have updated to the latest SPP and reset the Ilo username and pw which I will supply upon payment. The top of the case has a few minor scratches from general DC moving and decommissioning, otherwise ever

I have a few extra sticks of RAM kicking around and would like to move them if possible. Quantities and pricing below, shipping is to Cont uS only, prices are in USD.
While branded as HP Genuine, these are Samsung Dimms and will work in plenty of other non HP systems, why pay more. Minimum purchase Qty 2 in order for Free shipping. (exception for the 1 Hynix stick)

PayPal or Local cash works for me. (Zip 01803)

T-Stamp

Looking to get a PC for these, I've seen prices from $35 to $150 from some server companies. eBay seems to be all over the place as well. TIA

M386A2G40DB0-CPB2Q