Azriall

Hi guys, I currently have a Asus ax86u-pro and i've had it for the year and half, its poor. I had a netgear r7000 nighthawk for 10+ years before it died, and I got this router as it had good reviews. It hates my IoT devices like alexa and ring, or even my fridge, they drop off all the time. I've spoken to people and research settings etc. Lately I now have ports failing in speed from 1000/1000 to 100/100 to 10/10, the other day I had a repeating error 3 times a second that forced a cpu bottleneck and reboot. My old Netgear just worked, and I could connect to the wifi from much further away. I live in a two bedroom house so range isn't a issue. But my door bell which is my furthest point says

Hi guys, I've seen many racks both at peoples homes and at work. why does it look like two long lines of network cables going into one port then into another machine beneath. Like if there is 20 ports on either machines there will be 20 network cables joining them. If it was one cable going to one machine and then 20 going out I would assume its a network splitter...Just genuinely curious.

Hi guys

So I've gotten my hands on some more External HDD sata 3.5inch. And I want to use them my my HP prodesk PC that I'm using as a home server. Its not the form factor model but the smaller PC version. Any ways I can do this externally like a rack with USB access to the PC? I know they won't fit on the 2.5 HDD inside is the main drive. I'm running Ubuntu with CasaOS though i'm about to try running Proxmox instead.

I have at home 2 HP T510's mini PC's, both are with 4gb ram and 1g intel processors, Looking for recomendations for a fun project with these. I have a Hp prodesk Mini runing CasaOS (when it works) and I use that for my emulatorJS, Jellyfin and Audiobookshelf dockers through a Nginx Proxy, just looking for a interesting idea for the spare 2 T510's. Just something fun to help me learn more about networking and its uses. Maybe something to tell me is a server is no longer responding or even some kind of miner, no idea just after something useful and fun that I can learn on

Hi guys, My Netgear NightHawk R7000 started to die on me, losing wifi signal intermittently in the house, So I brought a asus RT-AX86U-Pro which be all rights looked like a modern and better machine, but Its not working well. My alexa's keep losing wifi even in the same room, I suffer Lag in ethernet connections in the house on the PS5 and PC, I thought I was getting a solid reliable router, that should be out performing a router I got over ten years ago, am I missing something, I've done factory resets and messed around with all kinds of options and I'm getting no where except frustrated kids and gamer wife.

So for context I got given an old work pc. Successfully installed Ubuntu server on it but I find after a few days it stops working properly. I can no longer ssh into it. I did a dmesg and found the following. Can anyone help me out.

ed Nov 13 17:14:34 2024] x86/cpu: SGX disabled by BIOS. [Wed Nov 13 17:14:34 2024] hpet_acpi_add: no address or irqs in _CRS [Wed Nov 13 17:14:34 2024] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [Wed Nov 13 17:14:34 2024] platform eisa.0: EISA: Cannot allocate resource for mainboard [Wed Nov 13 17:14:34 2024] platform eisa.0: Cannot allocate resource for EISA slot 1 [Wed Nov 13 17:

Hi guys, been posting before and i'm still no closer to finding out whats wrong with my server. My system has Ubuntu server 24.04, CasaOS with containers for jellyfin, audiobookshelf and emulatorJS. every few days my when I try to access my webui I get a screen that only shows "Message" "not found" and my containers stop working. I can't SSH into the server and I can only fix it by powering off and back on. I'm at my wits end, Ihave checked error logs but it hasn't helped. I setup a command to reset the pc each night at 4am. I can garuntee after 2-4 days the webui will fail and I lose all access. Can anyone please help me. I'm at the point I may just throw the whole server away and just use

Hi guys

My syslog on my casaos keeps filling with this line

2024-09-26T09:50:56.016567+00:00 vanadiel casaos-message-bus[961]: {"time":"2024-09-26T09:50:56.016293708Z","id":"","remote_ip":"127.0.0.1","host":"127.0.0.1:45217","method":"POST","uri":"/v2/message_bus/event/casaos/casaos:system:utilization","user_agent":"Go-http-client/1.1","status":200,"error":"","latency":328173,"latency_human":"328.173µs","bytes_in":626,"bytes_out":778}

It eventually stops casaos working and i get a "message not found"

Was a clean ubuntu server 24.04 install, updated and casaos added. worked fine on my pi4 but plays up on my hp prodesk mini 400 g5.

Please help

Hi guys

So I have the above spec machine I was donated from work as old equipment, And its being tempermental. I can get it to run Ubuntu server 24.04 with CasaOS installed, And the dockers Jellyfin, Audiobookshelf, Navidrome, EmulatorJS and Nginx Proxy Manager. No other software is present. I'm currently getting to my wits end with this machine. I have this machine doing a daily reset each day at 4am. I find that it works and I can access my books and videos remotely via proxy as normal, then a few hours later it no longer works. I initially diagnosed this to the PC not liking the HDMI port being unplugged. So I purchased a Display Port spoofer (I know its different port but I figure the P

Hi guys. Trying to do something new for me. I have the simpl script running in my battle bridge and now I would like to duplicate those displays in engineering. I added the new lcd’s to the simpl group but they are just showing blank. I checked the guide and I see how to extend over multiple displays for a larger image but not a duplicate. Anyone had any success with this?

I'm actually having issues Running Ubuntu 24.04 server with CasaOS and it seems to randomly be unreachable by SSH or my proxy. Only way to fix it seems to be restarting the whole machine sadly. It was a fresh install from USB and it upodated. I tried looking in the logs and i see plenty of errors such as

2024-09-12T18:16:35.014280+00:00 vanadiel casaos[1054]: {"time":"2024-09-12T18:16:35.014186022Z","id":"","remote_ip":"127.0.0.1","host":"127.0.0.1:43107","method":"POST","uri":"/v1/notify/system_status","user_agent":"Go-http-client/1.1","status":200,"error":"","latency":26209,"latency_human":"26.209µs","bytes_in":14,"bytes_out":43}

No idea what this means but If you want any ot

Hi guys. So today randomly my cassos has just started doing this. I goto the webui and get a black screen with the words “message”: “not found” instead. My ssh won’t connect nor is my ngoni forwarding like it should be. This happened last night and I manually reset the machine and it worked. Just did a random check now in the morning and the error is back? Google search is not giving answers. Help please.

Hi guys. I recently took my casaos off my raspberry pi 4 and made a new install on a Ubuntu 22.04 LTS Server on a HP pro desk 400g5 mini. I got the install done without issues but I find whenever I try to connect to it I time out or just plain fail. If I SSH into it I get to do a command then it disconnects. Connecting to the homepage can happen then get stuck. I’m connected by network cable directly to the router and the ip address has been set to my desired address. Would love any advice you could give. Why can’t I keep my connection active? When remoting in via nginix CloudFlare says I’m not returning a connection. But later I can connect but will time out again.

Hi guys. I’ve been running a pi4 with casaos installed. And have recently acquired a hp pro desk 400 G5 mini which I think will run better than the pi4 as a server. But as I’ve set my pi up already and running off a micro sd card. I wandered if there was a way to just clone the data from my sd card to the pc hdd and run off that instead without reinstalling and configuring everything?

Hi guys

So i'm running Jellyfin, audiobookshelf and Navidrome on my CasaOS Pi4. I've opened up the ports I need to access these three. But I keep saying don't allow access to your content via the internet. Is that about opening ports or something else? I am in the process of making a Nginix port forwarding, Had it working on my old CasaOS but I had to wipe and can't remember how to do it again. Which is tonights job. Am I being daft here?