u/Benyth
I have a new build using the X870 Tomahawk and a 8700G CPU and I’ve tried putting several m.2 drives in the M2_2 slot and none of them show up in the BIOS. The same drives work fine in the M2_1 and M2_4 slots. I know that the M2_2 slot doesn’t work with the 8300G and 8500G which is why I got the 8700G. One of the reasons I got this board is to have three m.2 drives. Any suggestions?
I have a new build using the X870 Tomahawk and a 8700G CPU and I’ve tried putting several m.2 drives in the M2_2 slot and none of them show up in the BIOS. The same drives work fine in the M2_1 and M2_4 slots. I know that the M2_2 slot doesn’t work with the 8300G and 8500G which is why I got the 8700G. One of the reasons I got this board is to have three m.2 drives. Any suggestions?
And, yes, I ran the mkdir and touch bash commands. I keep getting the "Config Error: config not found at //config" error.
mkdir /mnt/user/appdata/Kometa/config
touch /mnt/user/appdata/Kometa/config/config.yml
I double checked that the config directory is at .../user/appdata/Kometa and that the config.yml file is in there.
I'm sure that I'm missing something basic, but I'm not seeing it. Any ideas?
My wife and I just switched over to CC and we had problems setting up the eSIM on our new iPhones and had to call into Support for help. The support person seemed a little green and didn't really understand how eSIM worked. For example, she insisted that I remove the non-existent sim card from the phone. Anyway, I carefully followed her instructions on scanning the QR codes and we ended up with our phone lines switched.
The problem started with the setup instructions sent with the phone. There were two QR codes, but no indication which went with which phone. She insisted that I use the second one for the first line and the first one for the second line. I questioned it a couple of tim
I would love to sign up for Ubisoft+, but without some sort of family plan my wife and kid would kill me. I'm OK with only being allowed one game session at a time, but it would be helpful if their saves were not mixed with mine.
Is there still no family share or family plan?
This has come up a couple times and I decided to make a chart. The trick is to make sure that no one pipe segment exceeds 300m/3. In the example below, you can see that we never exceed 120m/3 on any single pipe segment. Nothing is overclocked or underclocked.
When I first got Stadia, I couldn't notice any latency at all, but over the past few days I'm seeing 1-2 second latency when running with the Chromecast over 1 Gb ethernet and the controller over 5 GHz wi-fi. The visuals still look great, but I can barely use the menus and the games are unplayable. I've tried moving closer to the router and adding the controller to the priority devices on the router, but still no joy. I'm still researching, but can anyone suggest anything else to look at? Is there a way to see the controller's signal strength? I'm sure it is something on my side, but I'm lost.
arstechnica.com
38 Factory floors on 10 levels, each 20 x 16 foundations. This is Green 1.
Each factory floor serviced by 36 belt circular main bus
Main Bus. About 6000 belt segments
[Looking down Main Bus. It takes an item about 5 minutes to make the entire loop and it holds 1400 - 1500 items, not counting inline storage.](https://i.re
You've reached the end of this feed.
