BooksofMagic

u/BooksofMagic


r/ontario•

I got an email a couple of days ago regarding my "delayed due to labour dispute" package

"A claim has been filed through U-PIC Insurance Services for your shipment dated 2024-11-05."

It also describes in detail the contents of the package.

Anyone else get one of these yet?

12

r/HomeServer•

For a QNAP conversion - If you had to choose what would pick?

a) Single nvme 256gb boot drive with a mirrored second 2tb NVME dataset for VMs

b) Mirrored 256gb nvme boot drives but no 2tb dataset for VMs?

21

r/HomeServer•

OK so I was hoping to get some opinions here on what I should do.

I currently have two old gaming systems setup with TrueNAS scale - One is "Production" running home automation, pi-hole and plex. (i7-8700k, 48GB RAM, 6x2TB storage)

The second is my Development/backup server that runs the app to control my home wifi network and a second pi-hole. IF I have a new app I test it here. I also run management VMs and whatnot as needed. (AMD 3700X, 80GB RAM, 6x4TB storage)

I inherited a QNAP H764 nas from my old company when they went under. Under 2 years old. It was used as on site backup for a company that was 99% in the cloud so was almost never used. Its an i5 12400 with 64gb RAM and 6x4TB

21

r/truenas•

Really need some help here. I don’t know where to look next. I am reposting here what I created as a bug report a week ago. Here is a link if anyone has access: Log in with Atlassian account

Any more info requred please let me know. My network topology is two PFSense firewalls in High Availability mode. The LAN switch is a Cisco 3750 with 10gb fibre to both firewalls Both servers have two physical network connections to the switch - those ports are configured to VLANs 10 (network VLAN) and 25 (Server VLAN) and share them to internall apps and VMs via bridges. They also share a dedicated network card for inter-server communication

FIRST

17

r/networking•

I have a new old stock Cisco 3750x that I am setting up for a home lab network. I have enabled DHCP and am setting up multiple Vlans. The problem is that, once an interface is enabled. the inter-vlan routing seems to work for ping requests ONLY for a limited time. Then I can only talk within the Vlan again. At no point can I connect to an access point's web page from any vlan other than the one it is sitting on. Here is my config if that helps!

version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SCore
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$clLh$xFIn

425

r/GamingLaptops•

OK I have a Legion 5i Pro (2022) with Windows 11. I am trying to get g-sync working on an external monitor and it just won't work. I get a 60hz display no matter what I do. The internal display does have Gsync built in and it does work without issues. I have tried:

- Two different Freesync monitors that support HDMI 2.0 and Display port 1.4 (AOC 144hz and Legion Y25-25 240hz)

- Two different connections on both monitors:
- HDMI 2.0
- USB-C to Displayport. (Yes the usb supports DP 1.4 passthrough).

- Setting the laptop to Discreet GPU only mode (RTX3070)

- Ensuring the monitor is set to Primary display

- Disabled the built in display

- Checked if G-sync is enabled in

10

r/dyinglight2•

I just finished the game and I made sure to make the three choices these guides recommend and STILL did not get the ending where Lawan leaves with you. According to them:

So, in short, if you want to leave with Lawan, you need to:

Keep Hakon alive

Save Frank

Let Lawan detonate the charges

I ended up leaving by myself. No Hakkon. No Lawan. Both were supposed to be still alive so I should have gotten one of them. I suspect I should have sided with the Colonel instead of Matt but how else do you drain that part of the city? This is pretty frustrating not gonna lie.

26


r/ValveIndex•

I see posts about this problem all the time but I never see any solutions. I had the same issue and I thought I would share how it fixed it for me. Your results may vary of course.

The solution for me was pretty simple. I made a "Gasket" for the wall plate out of some thin black foam material using the wall plate itself as a template and cutting it

56