BsFan

Hello! I have a 2022 Lightning Platinum that I previously swapped the shifter for a rotary shifter out of a Bronco. It has been working great for over a year, but I had a software update last night related to the parking module and now I have a service soon message, drivetrain malfunction message on my dash. I scanned it with Forescan and have a P0929 error on the GSM. I really do not want to swap back to the big bulky shifter to test so I wanted to see if anyone has run into this? I am sure the software update tried to update the shifter itself, or new code is trying to get some state from it that does not exist on the rotary shifter.

I know a lot of people on here have done this sw

Has anyone who has done the rotary shifter swap had this recall done? I ask because it involves the Integrated Parking Module, and I want to make sure it won't have any conflicts with the swapped shifter.

Just finished working with an electrician to install a generac 6852 transfer switch. I was worried about the ground fault tripping since this has happened on other transfer switches I tested with. With those I would remove the ground wire and it would work but that's a sketchy work around.

Just flipped it from grid to generator power and everything worked perfectly!! The 8 circuits I picked we had all lit up and it was only drawing 800W for our 2500 sq ft house, should be able to get 5 or 6 days at that rate. Now I just need the power to go out!

I have been looking everywhere with no luck. I have a customer doing a full network refresh and the cabling is a mess. They have a ton of printers, all the same vendor MAC. I would love to create a filter or policy to match the first 6 of the MAC and put that device into the Printer VLAN. I can do this with other vendors but cannot find a way to do it here. I would love to save a ton of time by not worrying about what device is a printer, user PC, or phone. Using the VOIP feature for phones so that is no issue.

End goal is to have every port in the user vlan and have the other devices dynamically assigned. They do not have a NAC or 802.1x.

I have been bringing a large site into Central, all 6300M switches, and have one last stack that just will not connect. All of the switches used the same base configuration template, so there is no reason this one would not connect while all the others were fine.

The connection status says reprovision. I have tried disabling and re-enabling with no luck. The switch can reach central, and all of the members are in the device list and have licenses applied. There is nothing on Aruba's site that says what this status is, or how to fix it. I would love to not open a ticket if anyone else has seen this.

Hey everyone, looked all over and could not find an answer on here. I just picked up a 2019 Bullitt about a month ago. I have a 60 pound hound mix that we take everywhere, currently in a small fold up mesh crate. I would prefer to use one of those seat cover hammocks that secure to the front and rear headrests, but as you know the rear headrests are not high enough to secure anything to it.

Has anyone come up with a solution to this? I couldn't find any that utilize the child seat anchors.

I recently started making fermented hot sauces and am kind of addicted to the hobby. My problem is all I can find are jalapeños and habeneros / scotch bonnets. I have used dehydrated peppers in the past and they are alright, but I would like to find some fresh super hots. I have found some interesting stuff at Hmart but not exactly what I'm looking for.

Anyone have any ideas for farmers markets, stores, anywhere that would have fresh stuff?