Build68

u/Build68


r/GenX•

Keep it moving.

Old Person Yells At Cloud

Let us not be the next generation of oldsters who blocks the aisle with a diagonally parked cart while we contemplate the shelf in front of us, mouth agape. Keep it moving, the most extreme generation.

121


r/GenX•

So, I’m doing some simple tree trimming in the yard. I’m trimming branches and cutting them down to fit in the green can. I sit down on the edge of the patio to take a break, forearms on my thighs, and I see blood on my shorts. Look at my forearm, sure enough some branch poked me and made me bleed. No big deal, I didn’t even notice when it happened, but I’m thinking my skin is not as tough as it was even ten years ago. Do I need to moisturize or something?

214119

r/woodworking•

I’m switching more and more to metric in the shop and I’m liking it more and more for a number of reasons. First, I started using metric here and there because I bought a festool domino and a Mafell track saw. The adjustments are in metric, so I was forced to dip my toe in the metric sea. But I’ve learned the following things that I like.

  1. A millimeter is almost as small as 1/32”, there are roughly 25 mm per inch, so it is a nice, accurate, but still easy dimension to see on the tape and work to.

  2. Math is much easier. Centering a 3/8” dado stack on a board edge that measures 13/16” is an exercise in frustration. To be accurate I have to switch my construction master calculator to 1/32

397204

r/Cooking•

I spent the nineties until now watching all my favorite cooks discard most of the fat from a roast turkey and only using scraped drippings and some other oil to make a roux for the base of your gravy. Now, my turkey game is pretty on point, it’s an important meal to me and I only make it 3-4 times per year. I say discarding the turkey fat is absolute bull-s. I use that for my roux whenever I can. Now, every turkey cooks different, sometimes you don’t get a lot of fat in the drippings. Today I roasted a 10 lb breast to slice thin for deli meat. It yielded 4 lbs of good meat and plenty of fat drippings. At $3.25 per pound of yield, I’m good with that. Now, you know I’m going to make gravy with

10871

r/mafell•

Is there a quality alternative to Mafell branded blades for the 55 track saw? As I recall, festool compatible blades would probably work, but with a slightly wider kerf, they’d reset my sacrificial strip and lock me in to the wider kerf. What have any of you guys done?

10

r/Cooking•

I’ve been enjoying a Rick Bayless recipe for beef picadillo taco filling. I first encountered the recipe during farmers market season, so I substituted 2 fresh hot jalepenos for the canned chipotle. I sweated the jalepenos along with the onion. Now, my version has a really nice kick on the first day. Day two it is still a bit spicy but a lot less. Day three leftovers are devoid of heat. Is this a thing about cooking with peppers that I never knew about?

313

r/woodworking•

Venting on glue ups

General Discussion

I swear, glue ups are the bane of my existence. I was simply glueing some stiffeners to the underside of a shop made MFT tabletop. Not a complicated adventure. I had dominos mortised so everything was lined up nice. I dry fit the pieces. I prepared a water tub with a rag and everything I needed to spread the glue, I removed clutter, i had a special way to apply glue to the mortises and the dominos, I had a soft mallet to encourage sticky dominos. I did everything I could to prepare and succeed. Nevertheless, when the titebond started flowing it’s on my hands, then it’s on my elbows, it’s on the tabletop, the tools and everything I’m touching. It’s on the shirt I didn’t want glue on. I’m an e

9967


r/GMT400•

Ok guys, probably a nonsensical question, but this question comes from a place in my past. I was driving my 64 riviera with the 425 “nailhead” back down highway 50 from Lake Tahoe in the nineties. Now, I drove this car up and down the hill many times, and I always tracked mileage as an indicator of motor issues, per what I learned from dad. The Riv did a pretty solid 5 mpg up or down the hill, or anywhere else, it really didn’t matter. This particular time, there was heavy snow, and i did over half the journey down the hill at 25 mph. When I got home, I filled up as usual, calculated mileage, and I got 20 mpg going down that hill in that car. That stunned me. So, forget about being on a high

817