Coldstreamer

Hi all,

I've two glass doors with reeded glass panes, two of which are broken. I've enquired without success's online to a few glaziers for replacement panes.

Would anyone know a supplier or source of such in the Wellington region ?

https://imgur.com/a/6yHl5r0

Hi,

I have a problem in that my aged in wall wood burner has cacked it. I had a Chimney sweep check it out last week, the flue coming up from he wood burner itself into the chimney has rusted and there's corrosion and holes now after the first fire of the season a week ago. last Friday when it was cold we tried a second fire only to have smoke flooding out into the house. so we damped it out and called in help.

He reckons its just past it. and to be fair its probably an original from when the house was build in the 50's.

So question, who is the recommended wood burner installation people for complete unit replacements in Wellington ?

Any tips please ?

Ive just noticed and its bugging me, that the specials for Doctor Who are out of whack.

As per the screen show, the shows should be ( and they actually are)

Doctor Who (2005) - 0x156 - Resolution

Doctor Who (2005) - 0x157 - Revolution of the Daleks

Doctor Who (2005) - 0x158 - Eve of the Daleks

Doctor Who (2005) - 0x159 - Legend of the Sea Devils

but plex scanner ( and ive tried the old and the new and the tvdb etc show these as

https://imgur.com/a/L8HJQaE

which is bloody annoying.
Does anyone know where the plex scanner is getting its information from and how to correct that ?

I remember having this problem a year or so ago and a update solved it. Since the update last week to 6.2.11 Im experiencing the same issue.

Laptops and phones are not gaining IP addresses in the home DHCP range, instead are getting the 169 range and no connectivity.

Anyone else ? I not there's a few tickets in the Unifi forums on this but support are flapping about and not addressing it.

Does anyone know if its possible to display the site topology from the top down ? Wide screens were made for this, why is it left to right, as shown, I have to zoom in amp drag the screen around, where it could be top to bottom and occupying the entire screen real estate.

https://imgur.com/a/pfhyg9Z

Hi all, is there a sub Reddit somewhere for this, or is here OK, Im looking for a recommendation fro a plumber for a complete Bidet installation. I know they are quite rare in NZ< and there are some requirements with backflow adapters, but I'm looking for a plumber or builder whose undertaken one of these installations before.

Any recommendation please ?

Ive just taken delivery of my new Gpi case and following a vid tutorial and cant connect to retroflag.com for the patch, Ive tried from work, from a vpn, can someone confirm if its me or the site is dead ?

Hi, and thanks for reading.

So I have a US-8-60W running a 20 metre Cat 6 cable to the attic with a UAP-AC-LR on the end powered by POE. That was my first AP, but I did have the APO on the UDM at the other end of the house., all happy.

Since then I built a work from home office in the basement and moved the UDM there. Having a little extra budget and the wife saying she couldn't stream YouTube or video call in the garden, i invested in a UAP-nanoHD , running off the same switch POE, and moved the first AP to one end of the hose and had the second newer over the most populace end. YouTube and streaming now work great in the garden.

My question though is having these two AP, some 15

My Pihole updated in the last hour within Docker, and now isnt resolving DNS.

DNS service not running FTL offline

I can enable from the menu, but it starts then stops.

Googling hasn't found anything in the last hour so asking here if anyone else going through this

(This is the second docker container that's mucked up this week due to updates, Qbitorrent being the other)

Hi all,

I'm running Qbittorrent in Docker on my DS1817+. Have been running it over a year without issue.

This morning I try to load the web interface and there is no response. On looking at the Containers log files I get this error repeatedly.

/usr/bin/qbittorrent-nox: error while loading shared libraries: libQt5Core.so.5: cannot open shared object file: No such file or directory

Ive googled around and found this was a issue in Jan 2019, but not reported since, Is anyone else experiencing this and know of a way to repair ? Ive tried stopping and updating to latest with no difference.

Hi all, I have a Unifi Dream machine ( not a pro) and i'm happy with it. Bought it about two months ago, kitted dmy home network out with two 8 port switches and a UniFi AP-AC-LR

I had thought these were frequently updated. I'd heard support from Ubiquity was on the edge. but I've not seen any updated for these since install, and checking the UDM Im on firmware 1.5.6.2150 and there doesn't seem to have been a release since March 2020 and its november now.

What gives ? Can anyone explain the lack of stable updates ?

Doe anyone know how to reset the viewpoint, I can zoom in and out OK, but not rotate or tilt, dont even know how i got it into this position !!!

https://imgur.com/cpB2yNy

Hi googled with no result so asking experts here.

The wife and I have been using the term

Alexa Countdown 5 minutes, for a couple of years, and suddenly this doesnt work.

We need to say, Alexa set a timer for 5 minutes.

Does anyone know if this has changed or is it just us ? or is there a setting Ive mucked up ??