CrumFly

I got a 2017 citadel with 5.7. Got the emissions code. Replaced hoses, the module, the charcoal canister. Still getting the code. Last thing I hear is the gass tank fill neck. It would make sense because ever since we had the truck, we've had to fill the tank with the pump handle upside-down.

Having a hard time finding the parts and a replacement video. Anyone has done this that might point me to a good source of info?

Thanks,

Im doing my first hyperlapse of a large construction site. Its like a 4 month schedule with once a week flight. I tried to manually create waypoints flight and ran it twice so far recording 4k 30fps. When I brought the 2 clips into Resolve and tried to transition from one to the second, i notice that they dont really line up perfectly. Its a noticeable bump. Maybe the wind or maybe my manual waypoint mission wasnt as smooth as it should have been. I want to figure this out before I waste any more flights.

How are you guys blending the clips together? Any recommendations on a transition filter in resolve? Any editing tips would be appreciated.

Also am I actually doing it right? Im doing a 4

Any ideas on why my rear doesnt spring back like the front?

Read video https://streamable.com/kby7cc

Front video https://streamable.com/4ihatw

I took apart the shocks and the rods are the same height. Shocks move up and down the same. The springs seem the same.

Thanks,

For example, you need to check on the fire every hour ( or half hour, what ever time) Are there ways to create a sort of a timer that can alert you. The only thing I can think of was a wooden rack that can be partly in the fire. Hanging a metal pot of the rack. Lay some rocks under the hanging pot. Once the rack base it too burned and weak, the rack falls apart and the pot falls on a rock, making a loud sound. Obviously this not practical because you would have to make a new rack every time with inconsistent time span.

I guess im interested in any type of primitive timers.

I have a 2014 ram 1500 5.7 Sport. My uconnect was acting up so I upgraded to an android auto aftermarket radio.

I need to turn off the hill start assist. Every forum says do it via the settings menu in uconnect radio. Is there a way to do it without the uconect? I dont see it in the little screen by the gauges.

I got that annoying jerking when slowing down to a stop.