Crymtastic

Title,

No matter what vehicle or what race, if I don't brake until my line is at least nearly about to turn blue, my car doesn't turn and just keeps on going straight into the wall. But now I'm seeing all these videos of people whipping tight corners at high speeds and starting fully in control.

Hello all, my Katana Mk2 100 is buzzing on anything but clean even though I'm plugged in through a Furman power strip. I'm not sure how else to resolve this.

Suggestions?

Hello All,

I am looking to upgrade from a 8700k to a 7800x3d for the massive boost and it looks like microcenter currently has a bundle for the mobo, ram, and processor in the below parts list.

​

Everything marked purchased is already in the pc, but I was wondering if this is a good move (for these specific parts) or if I could do better?

​

Thanks

​

[PCPartPicker Part List](https://pcpartpicker.com/list/fpZr89)

Title. In all the betas, warping to kyovashad was a coin flip on whether I would get 5 fps or be unaffected. There never seemed to be too many people around either. I have a 3080ti and it certainly isn't maxed out.

Just curious if people were having this and if it was fixable.

Alright, post rotation, I'm having difficulty finding a deck that is both enjoyable to play, and has a fair chance to win (~50% ish).

I have tried to play Gardevoir ex and Miraidon/Regieleki, but my god this community latches on to the most BORING mechanics.

I have tried lost box with and without Giratina, Magnezone ex, some memes with Wugtrio and Gyarados from PGO, and Dialga VSTAR. None of these decks are fast enough to outpace Gardevoir and Miraidon, so they just lose 80% of the time.

I like Arc/Dura, but the two best decks run zero special energy, so it seems pretty pointless to be honest, and even with the new addition of Vulpix VSTAR, I really believe that's only good in competet

Hello,

I have been playing PTCGL since beta launch with relatively minor bugs and issues here and there, but last night and this morning when trying to play, the game is taking 100% cpu usage just sitting on the home screen or attempting to go into the deck editor. This is not an underlying issue with my system, as everything else works, and i idle at 7%.

​

There was no update, so I don't know why this is happening.

I'm in arena 4 and people are using units from arena 6+ and it's frankly impossible to beat them

I was just at 520, and queued for a ranked game, in the loading screen it showed my rating as 410, and then after I won, my ranking was 360.

​

Very confused.

Okay i understand how the deck works, I use arceus to energize duraludon, lugia and mew can't kill me. What about every other deck that uses basic energy and I only do 220 damage? Just trying to understand how this is a top 4 deck at a regionals if it only counters 2 decks, and only if they don't draw path.

Hello,

​

A couple months ago, i had replaced the thermistor on the hotend and the heating cartridge for this exact problem and did a PID autotune, and ended up printing a bunch of things.

​

Now after leaving the printer off for a couple months, I am suddenly getting one of the two errors mentioned in the title more or less at the 20 minute mark in every print. I cant see how leaving the printer to sit, where no one touched or bumped it or anything like that would suddenly be causing these issues. Like i said, the parts that would be causing this problem are basically brand new.

​

Is there a way to resolve this without having to spend 6 hours taking th

Hello,

After recently upgrading my build to a 3080ti from a 1080ti, i am not always seeing the kind of performance that I was expecting. Often times when running games on ultra i will have micro stutters or frame drops that I either didnt have before with the 1080ti, or have not improved since upgrading.

​

The build is as follows:

​

1440p @ 165hz

​

CPU: i7 8700k @ stock

Motherboard: AsRock Taichi z370

RAM: 32GB Vengeance PRO @ 3200

GPU: MSI 3080ti @ stock

PSU: 850W Gold

​

Games are on Sata SSD and I have Windows 11, though it wasn't any different on 10.

​

Temps aren't above 60 for CPU or GPU.

​

Does anyone hav

Hello,

After not printing for a couple months on my Ender 3 Pro, I was attempting to print something with the same setting as ive used before, and the print was halted with an E1, which i took to mean that the thermistor was bad, because when i restarted the printer, the temp was -14.

​

I replaced the thermistor with a new one and attempted the print again, where i once again had an E1 Printer Halted error, and another one for E1 Heating Failed.

I took this to mean that somehow the heat cartridge went bad, even though i hadnt used it hardly at all, and replaced the heat cartridge.

Unfortunately, i am still getting E1 errors, both just generic Print Halted and Thermal Runaway,