Danald2000

Hey all,

Recently moved to Boston from SF, and have been noticing that after a while outside the oil gets so cold that it won’t wick. This prevents me from being able to hit it.

Any cold weather veterans have tips or tricks for usage?

What is the current best recessed battery (where the cart goes into the battery like the ccell palm)? I'd like it to fit ccell cartridges also.

I lost the luer lock needle tip for my distillate syringe, so I can't refill carts. I see that I can get them on Amazon, but does anyone know of brick and mortar stores that also sell them?

Does anyone have cheap ebay sellers for ccell that have routinely provided a quality product?

I understand that they are not made by smoore and are knockoffs, but has anyone had any luck finding comparable carts?

I understand that nicr (n80) has a much lower tcr value than ti or ni, are there chips yet that can perform temp control accurately for nicr yet?

I know many devices claim to do it but are any good? Maybe not perfect but getting better? The pax era claims to operate tc with nicr wire, is this complete bs? It might not be perfect, would it be moderate or okay?

Has anyone successfully cleaned a maxvapor v2 cart? Any tips or tricks?

I got some water in it (I was high af), and the taste is a little off now.

I understand they are cheap and can be disposable, but my current one still works fine and I hate to be wasteful.

I am looking for a buttonless battery I can use with these cartridges. It can have a button I just very much would prefer an auto antic battery that fires when sucked on. The basic cheap ones (280mah with a stylus) don't work, I'm assuming from the amperage pull being too much. Has anyone tried this kind of battery and had success with these cartridges?

Hi Waxpeners,

I recently have made the conversion from regular atomizers to filling the vape710 cartridges with distillate. I got rid of all my old atomizers and such, but now realize that when filling there is always a drop or two that wont go in and instead of wasting it I'd love to put in into a layg device.

I am tight on money right now and am looking to spend the least amount possible. The option doesn't have to be great as it'll only be used once every time I refill the cartridges and will not be my daily driver by any means. I understand the Sai and Miracle B are very nice for distillate, but I want the bottom of the barrel cheap.

Right now I'm looking at these two atomizers. Is t

Quick question about mods, I understand that arcticfox is truly exceptional firmware that greatly improves the usability of a mod; how important is it for our applications? We don't use high wattage mods and was wondering if Arcticfox is overkill for the average user?

Also what is the cheapest and the smallest options compatible with Arcticfox?

I know everyone loves the Pico, but was wondering if there's anything cheaper (I don't have 18650s so would have to buy one), or anything smaller.

Thanks!

I got 2 atomizers, 1 spare coil, and 1 bubbler 100 days ago along with an Istick Pico running arcticfoxZ

Settings I like best: vw 15 watts for normal usage, vw 17 watts with 150% preheat for the end of a load. I do not use temperature control as I have heard from multiple people that the wire is to fragile for the constant reheating of temperature control.

Loading: I load .3 grams at a time as I am a light user, but have loaded up to .7 comfortably. All loads need time to leak down (priming hits)

Airflow technique: I keep the airflow slightly open. I inhale slowly after a 2 second preheat and take a clearing hit but no cool down stuff.

Problems(many people complain these thing; taste, l

I see so much discussion and thought going into what atomizer on mod, but not so much what goes into the hardware; and it definietly takes two to tango.

I have had some lackluster concentrate experiences lately and would love to here of any liked brands or recommendations. What strains do you prefer? What's the absolute best concentrate you've ever had?

(I'm located in Oakland so if there are any bay area Ents here please point me in the right direction!)

Hey, I have an altoid smalls tin, and want to create a small and simple vv device. I intend to power it with a 500mah 3.7v lipo battery I have laying around. No interest in making the battery swappable, and was thinking of sanding off one of the top ridges to place the 510 connector on.

My thoughts so far are to take apart an old 510 battery I have and use that connector, use this control board https://www.fasttech.com/forums/2093101/t/1793346/great-little-mosfet-pwm-controller/5 and charge the battery with this http://www.ebay.com/itm/5V-1A-1S-3-7V-Li-ion-18650-Lithium-Lipo-Battery-Charging-Module-Charger-Board-/282238421787?var=&hash=item41b6b88b1b:m:mM_VoxEltZf2E1oR1L4cGJg board.

Hey there waxpeners,

I recently got my miracle s and have been loving it (detailed write up coming after a few more data points are added ;) )

I've been fascinated by the saionara and other layg coils. being a broke college student with add I'd love to build or equip my miracle s atomizer case thing with other coils. I have yocan evolve plus qdc coils, would be fine with purchasing and hen modifying other coils to fit, and am comfortable building my own coils.

Are there any tips, directions, or advice that the knowledgable could impart onto me. (If it is a stupid idea and waste of time don't be afraid to tell, but I'm excited to do this and overcoming issues or problems would be fun for

Can I run one of the cheap disposable cartridges on a mech mod with a max voltage of 4.2 (one 18650)? Will it damage the atomizer/coil or the mech mod itself. I am okay if it runs hotter, as long as it doesn't damage the actual components.

I understand that it is not a good idea to try new things or experiment with Li-ion batteries. I ask that you put these qualms aside. Could one theoretically charge a protected 17670 (small mah Li ion) in a mechanical mod that then was plugged into one of the 510 usb chargers. I dont see an issue with this on a science level, the protection circuit on the battery would not allow the battery to be charged above 4.2 v correct? And these chargers are designed to charge Li-ion, while different in shape, batteries. I dont see what could go wrong (assuming everything serves its intended purpose)?