DanielB1990

Hello everyone,

Please let me know if the sub-reddit isn't to ask the question I'll be asking.

We've recently bought a second-hand PHILIPS EP2220/10, it needed a bit of cleaning but works great.

The only thing I can't seem to figure out, is how to extend the time it'll suspend itself.

I've read you should either:

• Press & hold 'Clac / Clean', but nothing happens
• Press & holding both 'Calc / Clean' and the 'Aroma strength'.

The latter will 'light up' and allow me to toggle between 1 - 4 lights of which I understood:

• 1 light → 15 min
• 2 lights → 30 min
• 3 lights → 60 min
• 4 lights → 180 min

But I've tried 'm all, and it'll stay 30 minutes, and I'd like to extend to the max.

Good evening,

I've been to quick to jump the re-install path of my server, and with doing so lost important data to be able to reach my borgbackup repository as the key is lost due to my trigger finger.

I'm aware at creation I've been told to secure it and I'm learning to hard way to read carefully.

I'm therefor asking for some guidance on how to recover a specific path, which is:

/root/.config/borg/
├── keys
│   └── uNNNNNN_your_backup_de__backups_server
└── security
└── a6e7fafb6a9558572108a77c2ef83095b80410c467e2e41fbb63c87b61b68338
├── key-type
├── location
├── manifest-timestamp
├── nonce
└── tam_required

I specifically need the data in `/root/

Good evening,

I've been to quick to jump the re-install path of my server, and with doing so lost important data to be able to reach my borgbackup repository as the key is lost due to my trigger finger.

I'm aware at creation I've been told to secure it and I'm learning to hard way to read carefully.

I'm therefor asking for some guidance on how to recover a specific path, which is:

/root/.config/borg/
├── keys
│   └── uNNNNNN_your_backup_de__backups_server
└── security
└── a6e7fafb6a9558572108a77c2ef83095b80410c467e2e41fbb63c87b61b68338
├── key-type
├── location
├── manifest-timestamp
├── nonce
└── tam_required

I specifically need the data in `/root/

Since selling our house, we've been living in places where I didn't need my Unraid server, nor was I able to set it up properly.

Finally, after being about 8 months in our new home, I have some time to start up my Unraid server and it is running again, it's been a while hehe as you can see: https://imgur.com/a/ctmlQtm

So, anything other then updating that I need to know of? I've lost track a bit.

Good afternoon!

I'm investigating my options on a dynamic testing part within gitlab-ci.
All our projects have the same build(, test), publish and deploy pipelines.

Test currently is only a simple echo with 'we should test here', but I want to, at least if it's possible at all to have a .gitlab-ci.override.yml to override the whole 'test' stage, as testing needs to be done differently based on the project which can consist of something programmed in php, python or ruby.

So much like you would with docker-compose.override.yml but can't really find the right information about if it's even possible, and if it is, how I'd implement this.

The current [https://docs.gitlab.com/ee/ci/ya

Hey!

I'm wanting to give insights to a customer, about their disk usage in a way the can dynamically browse through it.

So I was thinking, as ncdu has a json export function I could output that for them.

But then the next struggle is, are there any tools that can read that json and display it online on their shared webhosting ( with php ) for example in a way that they can browse it like you would with WinDirStat or QDirStat?

Or does anyone know of any other tools that can achieve this in a PHP environment?

Hey!

I've found a 2nd hand / refurbished Checkpoint 4800 firewall ( CPAP-SG4800-NGFW ) and I've seen people talking about that it's possible to use it with pfsense.

Could someone confirm that currently uses something similar?

If so, I have a few questions:

• What's the power draw
• Can it fully use 1G FTTH? ( What I can find it should be easily able to )

And, any other words of advice on this?

Good evening!

I'm looking to debug PHP code, I would normally go by the means of: echo "Step 1\n"; And/or using print_r / var_dump on specific variables.

But is there a 'set -x' ( bash ) equivalent for PHP?

That would make things a lot easier at times, at least it has helped me troubleshoot bash scripts.

If there isn't, what would be my best next steps to debug vanilla php mixed with some packages added with composer ( OOP coded parts )

Thanks in advance.

Hi!

I'd like to set-up a proxy on my raspberry pi, running at home that I can use on my VPS for https://github.com/postaddictme/instagram-php-scraper via the "Using proxy for requests:" as my accounts are taken out because not complying with Instagram's terms and conditions.

So this isn't a reverse proxy, but I can only find information about reverse proxies as that's the 'hot topic'.

Can anyone help me on either the name / term I need to search for, or if possible a solution that I can run at home ( via VPN? ) and use that to 'proxy' the request from the VPS through my residential connection?

Trying to see if anyone in r/DataHoarder was actively mirroring the https://github.com/getferdi/ferdi repo via: https://www.reddit.com/r/DataHoarder/comments/u2so9q/getferdiferdi_repo_mirror_by_any_chance/

I did see a few other repo's being named already, but from what I could see either didn't have the official commit history are were behind on the official repo.

Hopefully the Ferdi can be salvaged / revived.

Hi all!

I've been looking into Technitium DNS Server as a replacement for Pihole / AdGuard Home, it looks professional, has a better visual appearance from a 'tech' perspective and options all seem promising!

The only thing, I'm missing which makes me hesitant to use it in my home network, is not being able to manage client and/or groups separately, for example (partly) excluding the misses, like I would with Pihole or Adguard.

Is this something I'm overlooking? Or doesn't Technitium have this option?

Hello / Good morning (CET TZ),

I'm quite new to Python, but seem to be finding my way quite well, as the language is good to understand and I really like the indentation requirement to keep it clean!

I'm trying to do some mailbox management with imap_tools ( https://pypi.org/project/imap-tools/ ) and before moving a message to a folder, I want to create the folder structure.

As I couldn't find if I could do a create folder action on the full string e.g. "INBOX.mainfolder.subfolder.subofsubfolder" I wanted to split it up per dot:

• INBOX
• mainfolder
• subfolder
• subofsubfolder

I have this part ( *I stripped the mailbox parts, to keep it to my qu

Hello everyone,

I'm looking for a self hosted headless CMS, that can be used to only manage data / content.

The website itself is already build with HTML, with 'example data' and I'm looking for a CMS that I could use to let the owner / maintainer make changes to it's content.

I've seen and read several posts/topics and comparison websites about headless cms'es but haven't found the right match yet, and am asking for you're help, as I may have missed something.

I've seen:

- [https://www.reddit.com/r/webdev/comments/mk8vrx/looking_for_a_headless_cms_recommendation/guji4j6/?utm_source=reddit&utm_medium=web2x&context=3](https://www.reddit.com/r/webdev/comments/mk8vrx/lookin