DeathGhost

Has anyone utilized the telemetry plugin with Grafana via Prometheus? If so did you expose the data via MGMT interface or did you set it up with a self IP? If self IP, how did you manage to do it?

I just installed Proxmox VE 8.4, however once it finishes install and boots up, I'm unable to login to the web UI. I have the realm set to Linux PAM, however it says login failed. The same login works fine within the CLI on the console. I've confirmed the user object in pveum realm doesn't have tfa set. I've also went looking into the logs and can't find anything. I can't even find a daemon log which some articles suggested. I only have an access.log within pveproxy.

Any suggestions would be much appreciated. I've reinstalled twice now as well and still have the same problem.

I'm new to Ceph and just got a three node Ceph cluster stood up, however i'm unable to create any PersistentVolumeClaims using Ceph as a backer. All the claims sit in a pending state. Ceph status shows health warnings but only that the monitors have low space, however the cluster itself has lots of free space. Any suggestions on what to look at or next steps?

I'm using Rook Ceph in a Rancher cluster RKE1

So I've run into some issues with getting Ceph working. I deployed Ceph and the cluster shows a healthy status (The cluster has 3 nodes) but when i tried to deploy a pod with a persistencevolumeclaim using Ceph, the PVC was stuck in pending. After doing some digging, I believe I came to the issue that i'm missing a CSIDriver (It shows none). I've tried to find what i need to do to install one, but i'm stuck and not quite sure what to do. Couldn't find any great answers. Any recommendations would be greatly appreciated.

Hello!

I'm trying to setup a VPN profile for traffic into the network. I'm trying to have it setup so that the VIP for the VPN lives on (for example) 192.168.10.10 however it assigns users IP's from a pool of IP's (192.168.11.10-20). Each is a different Subnet/VLAN. Currently, from doing packet captures, its correctly assigning users an IP from the pool of IP's, however I see two issues. 1) The IP doesn't appear in ARP Tables and 2) Its not tagging the traffic coming from the assigned IP address, which in turn it appears that the router is then dropping it due to mismatch.

I've gotten pretty much stumped on this one and haven't found any good articles on it. Anyon

I created a new WiFi network that I want to move my Harmony Hub to, however when I go through the process that they say to follow (Setup a new Device), neither the smartphone app nor desktop app detects the Harmony Hub, even when I hit the reset button on the back and it starts to blink, just as the instructions say.

Has anyone been able to update the WiFi on theirs? Any suggestions?

Platform(s): Browser

Genre: RTS

Estimated year of release: 2008ish

Graphics/art style: Simple Text / pictures

Notable characters: None

Notable gameplay mechanics: Space Exploration, space was a grid layout, and each grid had stars, etc in it. it was another grid inside the bigger grid. You could also build stuff on the planets.

Other details: The game was a browser based space exploration and combat RTS. You would explore systems, colonize planets, mine resources, and build ships. The ships weapons were only Railguns. There was about 8 classes of ships I think? They only had Railguns and i think something for AA. There was Carriers and fighters which were considered top tier ship

I recently decided I wanted to get rid of my USG Pro and move to pfsense. I purchased a cheap Supermicro server on Ebay and installed pfsense on it. I got it working in my office with doing direct connections. Was able to get it installed, basic configuration, and passing traffic.

The issue I ran into, is every time I attempt to replace my USG with it, my network just shits itself. I can ping some things, but can't ping others. If I connect to my cloud key which is on my network, it shows all my Ubiquity switches as un provisioned. Everything is on the same VLAN/Network. It's the default network in Ubiquity. It's also setup as the same network in pfsense.

I also have issues with my ONT.

We lost our dog Jerry yesterday. We came home from shopping to him on the floor. We rushed him to the vet but they said he had passed. I had them find out what happened and apparently he had a tumor in his spleen that ruptured. I didn't always get along with him the best, he was my more my wife's dog, but I still loved him. He would drive me crazy but he was always still there. I can't get the image of him on the ground out of my head. I wish we didn't leave and think we could of helped him or at least said goodbye. The vet said it's a common issue and they go very quick. They don't show symptoms commonly until it's just too late and they pass out. We found him with throw up and poop and pee

I'm load balancing some DNS servers via LTM and the profile someone set in the past was a default udp monitor which does... Well really nothing. I'm looking to see if there is something better. I've struggled to find anything online and wanted to see how anyone else might do it. I'm wondering if I'll need to create a custom external monitor. Any suggestions welcome! Plan to use a layer 4 performance type for a new VIP I got to build for more DNS servers too. Any suggestions on anything different is very welcome!

I'm having issues where when I load a map (Fresh game) or a save file, all the trees are gone. I'm not quite sure what could be causing it. I've got Prop and Tree Anarcy and a bunch of other mods as well.

Way back when I lived in Virginia I bought a M&P 15 AR. When I moved to Maryland I kept it in Virginia then later I sold the upper and kept just the lower. I brought that into MD and then registered just the lower with the state as I was told I needed to do that... Now the question I got, is since that is a by name banned type, can I still convert it to an HBAR and be okay? Or does it not matter purely cause it has the stamp of M&P on it? Is it best to just get rid of it somehow and buy a none name banned lower? The confusing part is also cause I moved into the state with it. Appreciate any assistance. The laws in regards to ARs are... Confusing.

Currently our .NET core and .NET apps are using windows auth, however we want to move toward SAML. I've done a bunch of research and I'm just getting more and more confused. I see stuff saying .NET Core doesn't support SAML natively and that you need other libraries, or that the docs for .net show it's depreciated or now it's built into .net 4.5 but I can't find docs.

I'm just getting more confused and lost. I've found some libraries that look good but not sure if they are.

Any suggestions? Anyone here doing SAML? Any examples or recommendations?

Thanks!

I can't remember what movie it was... But I believe near the end there was a scene where a destroyed or damaged house was rebuilt and they show it all in a time lapse... I'm pretty sure the movie was animated? It wasnt that old I'd a movie either .. I'd say last 10 years

Looking for a 8 port Ubiquity POE switch at 60W or greater. With it without ears but willing to pay more for rack ears!