5015
DecimalPoint-
u/DecimalPoint-
This is a simple printable axis cover for the kobra 2 neo that allows use of ender 3 style axis switches over the proprietary ones that they want $18 for and dont keep in stock since its a legacy printer.
IDC how old a printer is it should be easily repairable with modern components. This was one of the most annoying things ever to model as the only 90 degree angles are in the rear back on the inside of the case.
you can find it on makerworld under "axis end stop cover for anycubic kobra 2 neo" as im unaware of the rules for posting links in this sub. hope this h
30
EPILETIC WARNING: THERMAL FLASHES DUE TO LOW FRAME RATE.
What you see before you is not only my introduction into this hobby, but also my attempt to make some old tech useful again.
The NV is a Mx9644 in a FDM Printed PA612-cf15 housing called the MMMIIT, a continuation project from Carlough's original mono design.
The unit cost roughly $80~ to assemble the housing.
I was able to find an absolute steal for the tube at $155, In the housing the unit weighs 1.2lbs, or 19.2 ounces.
From the markings on t
106
alright, this will be a long one so please try to follow me here.
THE AI's are Caine's eye's.
Red is the "unstable" AI
Blue, is the "stable" AI
when talking about eye position, its from Caine's POV not the viewers.
lets start with Caine and his eye glitches
specifically at the end of episode 6 when Cain reads the votes,
his left eye glitches red and right eye glitches blue.
This flips during episode 8 after his breakdown
his left eye glit
70
101