Drawbetterer

u/Drawbetterer


r/hardwareswap•

Near the Round Lake Park area in Lake County.

In person exchange, cash only - asking $450 and can deliver to public safe location.

No dead pixels or display issues, recently upgraded to OLED display. Can work as a KVM if you connect the USB cables to it.

timestamp w specs and white background showing no defects video cycling colors and with timestamp: https://www.reddit.com/user/Drawbetterer/comments/1htt95z/gigabyte_fi32u/?ref=share&ref_source=link

Gallery Link https://imgur.com/a/VrrA8HU

01


r/truenas•

After using Synology for a week, I’ve decided to switch to a TrueNAS build. Power is expensive where I live so I’d like it to be as power efficient as possible, but I’m not familiar with low power builds.

Needs:

  • budget of $600
  • open to used parts
  • prefer under 35w for CPU, 45w acceptable if performance gains are worth it
  • would prefer to future proof with 10gb
  • already have a SAS HBA 9200-8I - is this still viable?
  • primary NAS use will be the primary backup of family photos (replication tasks to cloud will be created)
  • secondary function will be content management - downloading videos, subtitles, etc, streaming with plex (transcoding not necessary but a plus)
  • tertiary functio
413

r/buildapc•

Recently purchased DS923+. After using it a week, I'm not really happy with the performance and want to go the DIY NAS route, but I have little experience with the low-power route. After my PSU and Enclosure choice (Jonsbo N3), I have a budget of $350 to spend.

  • I plan on running TrueNAS Scale
  • I want something low power/low heat - my office gets hot enough as it is
  • I'd prefer ECC if possible
  • I have an SAS HBA 9200-8I if that's still viable
  • Using 4x exos ST16000NM001G HDDs
  • I want to run some containers on the NAS
  • I want to eventually use 10gb (don't have a card or HW for it, so just a PCI slot would be nice)
13

r/mechanic•

2007 Mazda 3 2.3L Manual transmission

When changing into gear, it takes a bit for the clutch to release and transfer power to the transmission. For example - If I am going 25 and change from 1st to 2nd, as I release the clutch and start to accelerate - the RPMs go up for about 1-2 seconds before the speed starts to increase. Same thing from 2nd to 3rd gear - 1-2 second delay before it speeds up. When I accelerate rapidly, the car speeds up slowly.

 

I was thinking it might be the clutch, but I had it changed 2 years ago. I don't ride my clutch so I don't know if that would be the issue or if its something else.

 

Any suggestions on how to test the clutch before I tear it ap

19

r/hvacadvice•

My office has more than a few computers and servers. Unfortunately, it only has a single circuit which already peaks at around 85% capacity so I can’t throw in a window AC unit. Im in a rental, so I can’t just add another circuit.

I do have a 4in extractor fan. My plan is to toss these into a cabinet and run an extractor fan.

Would it be better to route that extractor fan to the window or AC return in the ceiling?

10

r/hvacadvice•

I'm trying to start a shop to help pay for an upcoming wedding. I have a few 3d printers and recently upgraded to a laser engraver. All of these are in an enclosed cabinet which I have been venting out of the window via an inline fan + ducting for most of the summer.

Now that winter is approaching, I need to ensure that:

  • Cold air doesn't come in through the ventilation
  • Cold air doesn't come in through the window cracks

I was thinking of adding some insulation foamboard to the window (2 layers fit), venting through that, and sealing it with plastic/tape but am definitely inexperienced with this.

Any suggestions would be recommended!

10

r/grandMA2•

I've got an upcoming show with some custom LED lighting. These are using ESP32 microcontrollers.

What would be the best way to link these microcontrollers to set the LED strip color and brightness using grandma2 or grandma3?

11

r/ergodox•

I have an Ergodox Infinity flashed with QMK. I have it connected to a powered USB KVM to switch between my work and personal workstations.

Whenever I power on the workstations, the keyboard is unresponsive until I disconnect and reconnect my ergodox infinity. If switching using the KVM, I get a “usb device was not recognized” error and have to reconnect. This goes for both workstations.

Any suggestions or troubleshooting recommendations?

63

r/tipofmytongue•

I saw a random scene from a TV show or movie that looked interesting. No idea where it was from, but this is what I remember: The scene started with a blue gooey orb forming way above a town, then the scene changed to a similar substance forming above a model home where there were 2/3 people next to it. I think it switched to a third view of another similar blue gooey orb.

Looked very much like a portal or such so I'd assume it's a SciFi series or movie, but I know nothing except that short 10 seconds of the scene I saw. Thanks!

14


r/homelabsales•

Trying to get rid of my remaining misc parts. $125 to whoever wants it all.

 

Location: Gurnee/Waukegan in Illinois

  • can drive up to 10 miles to deliver for $15 on top of posted cost, pickup preferred though. Will record videos of boot or such at request.

 

 

PM for more details on anything.

 

Pictures/ItemsDescription
Wifi Module SetIncludes wifi modules listed below
--- Intel 7260NGW
--- Intel 8265NGW
--- Intel 9260NGW
Server Chassis SetIncludes both server chassis below:
--- 3u Antec Take 3 Server Chassis -- includes 850w PSU
-
10

r/hardwareswap•

Trying to get rid of my remaining misc parts. $125 to whoever wants it all.

 

Location: Gurnee/Waukegan in Illinois

  • can drive up to 10 miles to deliver for $15 on top of posted cost, pickup preferred though. Will record videos of boot or such at request.

 

 

PM for more details on anything.

 

Pictures/ItemsDescription
Wifi Module SetIncludes wifi modules listed below
--- Intel 7260NGW
--- Intel 8265NGW
--- Intel 9260NGW
Server Chassis SetIncludes both server chassis below:
--- 3u Antec Take 3 Server Chassis -- includes 850w PSU
-
01

r/hardwareswap•

Moving soon and this equipment is no longer in use. Really only used periodically for practicing for certifications.

 

Location: Gurnee/Waukegan in Illinois

  • can drive up to 10 miles to deliver for $5 on top of posted cost, pickup preferred though. Will record videos of boot or such at request.

 

Forgot to include sticky note proof in original pictures - hopefully this will suffice as proof I am the seller. pics of items + pics of location where I took most of pictures.

 

PM for more details on anything.

 

Pictures/ItemsDescriptionPrice
Dell R710 Server~~2x Xeon E5645; 48gb ram;
12