ElevatedJS

Hi,

Looking for some build advice. My budget isn't completely decided yet, and I'd like to understand what I can realistically get around the $1000, $1500, and $2000 price points before deciding how much to spend.

New build or upgrade? New build

Existing parts/monitors to reuse?

• 1000W PSU
• Case

PC purpose? Mainly gaming + some local AI.

Gaming would be modern AAA games at high settings, including:

• Diablo IV
• Borderlands 4
• DOOM: The Dark Ages
• Similar current/future AAA games

For local AI, I don't plan on running any huge 600GB models or anything like that. I'm thinking 12-16GB VRAM should probably be enough for my use case.

Purchase country? Near Micro Center? Israel

Monit

This post contains content not supported on old Reddit. Click here to view the full post

This post contains content not supported on old Reddit. Click here to view the full post

I connected the hardwire kit to the driver's fuse box on a 2023 Nissan Qashqai, using fuse 69 (20A cigarette lighter). Ground is connected to a chassis screw. I tested both the yellow wire and yellow+red wire on the fuse since I don't need 24h parking mode. The car uses Micro2 fuses, so I modified the supplied fuse taps and crimped them to a Micro2 adapter with a 5A fuse plus the original 20A fuse from slot 69. I verified with a multimeter that the adapter is connected correctly to the fuse box positive side. The camera powers on normally, but when I connect the rear camera (USB-C), the main camera randomly bootloops. It also bootloops when I open Live Preview in the app. I checked the wirin

I connected the hardwire kit to the driver's fuse box on a 2023 Nissan Qashqai, using fuse 69 (20A cigarette lighter). Ground is connected to a chassis screw. I tested both the yellow wire and yellow+red wire on the fuse since I don't need 24h parking mode. The car uses Micro2 fuses, so I modified the supplied fuse taps and crimped them to a Micro2 adapter with a 5A fuse plus the original 20A fuse from slot 69. I verified with a multimeter that the adapter is connected correctly to the fuse box positive side. The camera powers on normally, but when I connect the rear camera (USB-C), the main camera randomly bootloops. It also bootloops when I open Live Preview in the app. I checked the wirin

Hi,

Is ShadownMountPlus the best tool right now for mounting? Voidshell had too many features and dev quit, any other alternatives for simple people that just want auto mount?

SMP works fine but sometimes it has issues because of kstuff.

Hey, Can GP2040-CE work as a native PS5 fightstick yet, or do you still need to go through the PS4 legacy + adapter setup?

Hi

I've had a PS3 CECH-2003B (Slim) for years and recently started noticing an odd issue when powering it on.

Sometimes when I press the power button it doesn't turn on and gives 3 beeps, but if I try again a few times it eventually boots normally and then works fine.

I also noticed that one specific game occasionally freezes during the loading screen, but it's very inconsistent. Sometimes it loads perfectly and sometimes it freezes. I haven’t seen this happen with other games yet, though I still need to test more.

I checked the syscon error logs and found error 2002.

From what I understand this is often associated with the RSX, but since the console usually works after a few attempts,

Hi,

I got to a situation where antigravity and supabase are fighting for port 9000, for supabase it's part of the pull command runtime which downloads a container and that's the default so it's hard \ not possible to change But i"m wondering why antigravity is using port 9000 i didn't find any configuration to back that up and even tho Gemini thinks it's CDP it's not because the config for CDP is different

Does anyone know why AG is using 9000?

Hi everyone,

I've been having an issue with my soundbar. If it's left plugged into AC power for a few days, it eventually becomes completely unresponsive. Even pressing the power button on the device itself (not the remote) does nothing.

The only way to get it working again is to unplug it from the wall and then plug it back in.

I think it might be a hardware issue, but I wanted to get some other opinions. It's connected to the wall through a surge protector, and the power cable is intact and not detachable from the device. The soundbar is also connected to the TV through HDMI ARC.

Not sure if that extra info helps, but I thought I'd include it. Thanks in advance for any input!

Hi,

Yes, i"m aware that Wetek Core wasn't officially supported and that it's very old but i stumbled across the device and didn't find anything better to do with it

Andorid OS is dead Libreelec is dead For this device

And i didn't find any success with Linux for it

So when i found it had a Lakka build once https://le.builds.lakka.tv/legacy-2.3/WeTek_Core.arm/

I tried to install it on the Nand via Libreelec update I saw someone do the same thing for Wetek Play 2 and it was fine

It boots, i can see the logo ok and all, then a broken blue image appears with maybe the lakka menu in the background, but no sound or response.

Tried different monitors and hdmi cables, tried to flash both vers

Hi,

Looking for suggestions for laptops that can run recent osx versions, preferbly not too expensive