Elspin

I bought a couple T1000Es to see what kind of range and functionality you can get out of these, and maybe even use them as a pet tracker as a side project. Unfortunately, after trying to use them as a client with a friend I found the range was so bad it was completely unusable. I've seen several others here say things along this line, but others claiming theirs get decent range. I live in an area utterly devoid of interference, and I can't go to the next street without these things going out of range. You could genuinely get better range from just about anything, paper cups and string would do the trick.

I even tried getting a heltec v4 expansion kit to see if pairing that with one of the

Apologies if this isn't the right place to ask but I wasn't quite sure where else to ask an odd question like this one. I really like the smartkey systems for padlocks because of the ability to re-key without doing any kind of modification to the lock itself that would probably be beyond me without a bunch of learning. I find it annoying though that their product line is incredibly limited on this front, their locks are quite large and I have a number of things I just can't use the padlocks on because it's too big and I'd love to eliminate a few keys off my keychain. Is there any reasonable way to put these lock cylinders into a different smaller lock body? Or is there just a better product

I have an HP Omen model 17-cb1010ca laptop and overall I'd been pretty happy with it but recently the charger started dying and I got a rude awakening finding out it's basically designed to prevent you from using compatible chargers not made by HP. As a result I've basically been without a laptop for two weeks now. I tried getting a slimq since original OEM ones have seemed near impossible to find anywhere but the slimq one doesn't seem to have the code cracked to make my particular HP laptop work (it will charge when off completely but when the bios protection circuit is active it rejects it, ie as soon as the laptop starts. Basically at a loss for what to do here, I've done about 8 differe

Got a 2yo rescue hog a little while back and it was very happy for a little while, getting friendlier every day. Today after checking in on it it seems like it has some sort of issue - it had crust around its eyes and it has been aggressively chewing on a spot on its stomach. We are trying to setup an emergency vet appointment but we may not be able to get to one immediately, so if anyone has advice on things I can do in the meantime I would appreciate it

Been trying to play this with my girlfriend but it's just a complete disaster, it often takes us 10-20 minutes just to get into the game! I've never had a game, especially not one made by a major developer, have netcode so absolutely awful. We're usually playing on the same network together and both have open NAT so that's not the issue. It's at the point where we consider just giving up on playing because the netcode is so garbage

Wondering if anyone's found a decent speed loader made for or just coincidentally compatible with the TM22? 3D printed is fine too, if I can't find one I might design one myself. It's a plinking gun so I go through a lot of ammo and I often find myself just using the 10 rounders that came with my rifle instead of the 25 rounders because getting the tiny rimmed cartridges in with the stronger springs is really fussy.

I have an airsoft setup I'm looking to upgrade to be more appropriate for when I'm at an actual range, I've got a typical arc rail helmet and some cheap 21NRR clip on earpro that connects via standard NATO U-174 plug to a PTT that goes to a radio. I'd ideally love to not mess with the PTT or the radio but just about every headset I've seen under a thousand dollars works by doing radio->PTT with the PTT being a microphone -> aux to headset that is speaker only. Ultimately I'd be willing to ditch my setup if it makes more sense to get a better endgoal, but if possible I'd love to do a headset that can manage both.

​

Been looking at and heard good things about the Axil Trackr

I've had a few different feeders for my budgies cage and so far I've hated all of them for various reasons - especially when it comes to when I have to leave my budgies in the care of a friend for a while. I used to use hanging bucket styles but the depth annoyed them, and by the time they'd eaten just 1/5th of the food they were mad kicking the shells out of them. I've also tried getting the tube style ones that have buckets inside and tubes outside the cage, these are what I still have on the cage but these have tonnes of problems too. The weight of the seeds is nowhere near enough to push them through the cage, and if the tubes are installed on the back the birds just throw them off the c

Have had a Hatsan AT44-10 for long while and I gotta say the hand pump is getting old, looking to swap to using a smaller size portable compressor that can be used off a car battery/wall. Hatsan one hasn't gotten amazing reviews, but have heard some good things about the GX CS2/3 and it's much easier to obtain here (Canada). Anyone here had one for a while and got any thoughts on it?

I was making some registration pockets for my material in my wasteboard last night but this morning when I went to setup the actual job, it wouldn't home at all. When I went to run the machine, everything seemed normal but when I hit initialize it just remained stationary. I can verify through the settings menu that all homing switches are working, so my assumption is either the z-axis motor or driver for it are dead. Would greatly appreciate any ideas for troubleshooting, there's honestly a pretty incredibly low amount of hours on the machine and even lower on the z-axis as it's a relatively recent upgrade to the z-plus so this is pretty disappointing to say the least

When I'm trying to share a clip from a discord channel, annoyingly it always attempts to download it when sent rather than playing it in the browser. Any way to get around this issue?

Was looking for a persistent world with a good chunk of content and possibility to hit max levels available for download and so far the best I've found is Rhun - but currently a bit lost on what to do with it. There isn't really any manual or wiki so to speak and there's a lot of issues with sporadic difficulty and wildly inconsistent xp vs challenge, as well as just some outright weird stuff. Still, it's the best I've found so far in terms of being playable

Is there a better module out there that's more quality over quantity I just haven't been able to spot? Or an old forum or wiki somewhere that would make clear how Rhun is meant to be played? Really wouldn't mind a somewhat linear progre

Not sure if this is a known result of a recent update, but I've been having weird issues lately. Every time I run the ModAssistant it always says I'm at BSIPA 4.0.5, I update, and then after running beat saber I'm back to 4.0.5. I also can't get custom avatars working either from the mod launcher or from manually downloading the most recent version from the github - no matter what I do, there's no mod menu on my left at the main screen