EngineerInTheMachine

u/EngineerInTheMachine


r/SatisfactoryGame•

I thought I would post this as a balance to those posts about getting the new resource and cost settings wrong in 1.2. I have got it right for me, but that doesn't mean it's right for you.

I saw the trap of setting the Space Elevator to 100x, never mind increasing recipe costs or reducing node purity. As some have posted, it's become one heck of a grind. Going the other way and making it too easy doesn't work either, as the challenge goes and it becomes boring building loads of the same thing. The devs have spent years rebalancing recipes for the default game to keep pioneers interested.

I chose modest changes. Randomised nodes with unchanged purity, and the Space Elevator x 2. Even that

1815

r/DerailValley•

I've not seen this posted, or even mentioned in posts, but as it has had a major impact on how I drive around stations I thought I would post it.

I have bound the driving controls to the throttle part of my Saitek X56 Rhino HOTAS. After a shaky start, having multiple analog controls for all the power and braking in a diesel, and especially analog regulator and reverser for the steam locos, has proved a lot of fun. DV has taken over as my game of choice for now.

The PSA - it also means I can control the loco in full from anywhere on the loco - standing at the front or rear buffer beam, standing on the boiler or bonnet, or even on the cab roof. True, unless I install a digital speedo in seve

1313

r/DerailValley•

After an initial hitch, I successfully programmed my X56 Throttle for the train controls. I had the left throttle set to the train brake, and it was working fine. I decided to change the allocation, so I could have the reverser on that channel. That change worked, but since them I haven't been able to programme the train brake onto any analog channel, not even the left throttle. I set the channel and it gets recognised. I calibrate it and it is shown as working. It just refuses to operate in game. All the other analog controls still work OK.

20

r/DerailValley•

No, this isn't a guide. Rather, it's a recommendation. I've just started reading a book (a real paper one) 'Top-Link Locomotives' by Norman McKillop. If you want to find out what it's like to drive a steam loco on a top express train, find a copy and get it. The first chapters cover in great detail how to drive - and fire - top link locos like the Mallard and the Flying Scotsman, and give a very clear idea of how much good driving is based on knowing the road and the loco, and planning ahead. It also reinforces the method of driving I was taught by an ex-BR top-link driver, namely the regulator open wide most of the time, with speed controlled by the reverser. And the idea is to meet the tim

3011

r/SatisfactoryGame•

Hi Snutt and team. I did take Wednesday off, and planned to get some game time in this weekend. My main aim though was to update my Satisfactory spreadsheets. I'm willing to let trigons be trigons (pause for groan), but did you guys have to add so many recipes?!

I knew about the alien tech stuff for phase 5, but come on! Even more recipes just for ingots? Now I've got to check back through everything to see if you've sneaked even more in.

10

r/SatisfactoryGame•

I successfully kept away from spoilers on this sub-Reddit since Tuesday, but now a game crash every 5-10 minutes is spoiling my enjoyment. I've not had any since I got this computer, till now.

As some of you know, with over 2500 hours in the game I'm no noob. PC spec is an Intel I9, 64 GB RAM, Windows and Satisfactory on an SSD and an Nvidia 3090 Ti GPU. Satisfactory is running on DirectX 12. What I've done so far:

Verified game files - twice

Updated drivers - motherboard and GPU

Made absolutely sure mods are off - the first line of the crash report says Mods - no

Cleaned my PC air intake

Ran temperature checks on the CPU and GPU. CPU is around 40 deg, GPU controlling to a steady 60.

411


r/SatisfactoryGame•

Partly in response to an earlier post:

Book the 11th September off work (already done and approved! Just need to let the wife know when she gets back from extended holiday ...)

Then keep off this sub-Reddit for a few days, so you lot don't spoil the surprises!

62

r/DerailValley•

I must have a lot of time on my hands, writing these guides! Well yes, I do. It helps pass the time while I am on holiday, at the moment on a ship in the middle of the Atlantic, between the UK and New York.

The last two guides have been about having enough water and steam pressure for this bit - actually driving the loco. As before, there are various styles for how you balance the regulator and reverser against the load and the track gradients. I was lucky enough to be taught the following method by a full time driver on a 15" gauge railway. He had retired from British Railways having fired the Royal Train when it was steam, and driven it when it was diesel. Sadly no longer with us, but tha

133

r/DerailValley•

Firing in Derail Valley isn't as complex as real life. Time for a disclaimer here - while I have fired and driven a number of different locos, I haven't had the experience of firing full sized locos for a full shift, so I can only talk about what works for me in the game. I don't believe the game has the mechanics for complex firing techniques, but if anybody knows differently, please comment.

As with water management, firing isn't a precise process, at least in the game. I add coal for two reasons - when the pressure starts dropping and especially when I am approaching an uphill. In the game I keep the fire near full, partly as a cushion, so that I can leave it to burn a bit lower if I'm b

185

r/DerailValley•

I don't recall seeing such a guide here before, so here goes. This is based on my experience driving various sizes of steam locos, and finding out that most of what I learned works in Derail Valley.

Terminology

1/4, 1/2, 3/4 glass - water level is shown by a glass tube. This is the water level from above the firebox crown to maximum capacity. So 1/2 glass is halfway up the visible glass. The level will move up and down because of the movement of the loco, so this is not an exact measurement. For gradients see later.

Bottom nut - the nut at the bottom of the gauge glass, and seals it in position against boiler pressure. If the water disappears into the bottom nut for too long, loco go bo

4222