First up thanks for all the info on here it's been really helpful! I'm in the process building my first loop and ran into a bit of a weird question; I had never heard of this before either here or in any videos I watched to prep for this build. Corsair manual has a section that states:
"It is also recommended to anneal the tubing before use. This ensures that all internal stress caused by the bending process is normalized. To do so, place the tubes onto a tray in a cold oven and slowly heat it to 80°C over the course of one hour. Maintain the temperature at 80°C for another hour, then turn off the oven and wait one more hour for the tubes to slowly cool down to room temperature."
Is this a
29
