Fragmaster

Hi SV08 users. I accidentally overwrote my Macro.cfg file on the machine and now my prints are throwing "unknown command" errors and behaving poorly sometimes. Does anyone have a default version of the file I can use to restore mine to default?

TL;DR Anyone else with a Mars 2 Pro need to use layer times higher than 5 seconds with non-clear and non-black resins? I've been using my new Mars 2 Pro for a couple of weeks and I've been having trouble when following the recommended exposure times for Elegoo Grey Water Washable resin. Support points (generated by PrusaSlicer) often detach from the printed objects when I reduce exposure times below 5s per layer. Has anyone else had a similar issue? For example, one print of four skeletons had three partial failures (one or more limbs detached from support points) when the exposure time was four seconds per layer. However, the same print had [on

TL;DR Anyone else with a Mars 2 Pro need to use layer times higher than 5 seconds with non-clear and non-black resins? I've been using my new Mars 2 Pro for a couple of weeks and I've been having trouble when following the recommended exposure times for Elegoo Grey Water Washable resin. Support points (generated by PrusaSlicer) often detach from the printed objects when I reduce exposure times below 5s per layer. Has anyone else had a similar issue? For example, one print of four skeletons had three partial failures (one or more limbs detached from support points) when the exposure time was four seconds per layer. However, the same print had [on

TL;DR Anyone else with a Mars 2 Pro need to use layer times higher than 5 seconds with non-clear and non-black resins? I've been using my new Mars 2 Pro for a couple of weeks and I've been having trouble when following the recommended exposure times for Elegoo Grey Water Washable resin. Support points (generated by PrusaSlicer) often detach from the printed objects when I reduce exposure times below 5s per layer. Has anyone else had a similar issue? For example, one print of four skeletons had three partial failures (one or more limbs detached from support points) when the exposure time was four seconds per layer. However, the same print had [on

I feel like we haven't gotten enough team bonding/background so far. We had a montage of training and Kazu making eggs for breakfast, but where's the the bickering, conflict resolution, the catharsis?

The most prominent example to me was never resolving Val's suspicion of Yaz because she is a Union defector. How are they fighting together in a team when one of the members thinks another could be a spy? I just don't know how Val fights next to someone she can't trust, and assuming they had a heart to heart off screen would be such a wasted opportunity. Val and Yaz working out their problem would be a goldmine of character backstory and world building!

Is Haddock saving this for later? Is

Does PayPal update their exchange rate fast enough for this to be a great time to buy E3D stuff?

It seems that Betaflight firmware doesn't want to connect to the cleanflight firmware, but I do not know why.

I've had this issue in the past but it went away after flashing betaflight to the board and I have forgotten the exact situation that made it work. Board connects to Baseflight without any trouble, but it refuses to connect to Cleanflight. Cleanflight recognizes the DF32 COM port and tries auto-connect but fails. I can flash new firmware to the board in the Cleanflight configurator if I use the boot pins, but that doesn't fix the connection problem so that I can change my settings in the GUI.

Does anyone have an idea as to why this is happening?

Thanks for your help.

I've used a Turnigy 9X for about 3 years. I like the features if the ER9X software for saving models and settings, but the thing is a bit bulkier than I would like. I recently built a RotorX RX122 Atom micro FPV quad because I wanted something as portable as possible, but now my TX is bigger than all the spare batteries, props, and quad put together. It'd be great if there was a smaller, full-featured TX that I can put an FrSky inside that still has programming options (even if there's no screen).

Anyone know of such a TX? I'd love to toss all my stuff into one large shoebox to take to the field.

It'd be amazing if I could set up my models on my 9X, export the settings to PC, then save the