Fudd79

Took my Air 3 up on Staurday, for the first time this year and the first time after I put reflective red tape on it. I know it'æs nesting-season these days, so I tried to fly away from where birds might nest, but still manage to aggrevate a swallow on one of the flights. As soon as I heard it's warning-calls I just RTB'd and moved on.

While no concrete proof, it seems the reflective red tape helped. When this happened to me back when I had a Mini 2 the bird was flying very close (maybe half a meter away), but this weekend, the swallow stayed a couple of meters away. I felt much more safe to maneouver the drone home with the swallow staying that far away.

It could have been a difference o

TL;DR: Going to the US for a couple of weeks this summer, can I bring Cubans?

I'm going to MA for a couple of weeks this summer, and I'd like to bring 10-15 Cuban cigars for my own use? I don't want to risk having them confiscated at the airport, Cuban cigars are getting f-ing expensive here in Norway, so I don't feel like throwing away good money.

Jeg sitter og graver litt i familiehistorien min, og ser at tippoldemor bodde en tid på Villa Soleglad utenfor Ås. Jeg har søk på nett, og finner artikler om stedet (pay-wall avisartikler), men når jeg prøver å søke etter adressen så får jeg hele tiden opp Villa Glimt i stedet.

Er det noen som kan assistere?

So, I used RealmWorks many (many) years ago, and it was ok.. Had it's flaws, but it worked. But the dev also had health-issues, so updates were ... sporadic at best. I see Lone Wolf still sells it, but I can't really find a date for when the last version was published. I see the certificate used to sign the installer is from 2021, but that doesn't really say much.. :/

Yeah, as the title says, I have a marker in the upper right corner that I have four unread "something". When I open the menu, it says I have four TIPS that are new/unread, but the category is fully explored and read! Any tips on how to get rid of this, it's rather annoying.

I've been looking for a good wiki-engine that can run on k8s, with replicas. My old goto wikis (BookStack and DokuWiki) don't really seem to fit too well.

Searching the web for alternatives is rather hard since I get a lot of results that are wikis about k8s, or links to the kubernetes-article on Wikipedia etc. I have however found Wiki.js which seems to have a good kubernetes install-guide.

Anyone know of any alternatives? (I'm pretty sure "Wikipedia" supports it, I just don't like that wiki's look).

The farmer next door has finally started harvesting his grain, so I took my Air 3 up yesterday evening. Filmed some harvester action at 4k/60 ISO800 with no filters. My battery was low, and I was losing light by the minute, so it was only ~15 minutes of flying.

Today he was back at it from noonish, so I put in a fresh battery and went out. Before lifting off, I confirmed the setup as I always do (DLOG-M, video-mode, manual settings, ISO etc). I noticed the ISO was back at 200, which suited me fine, so I took off. After flying to an altitude of 40m over the target area, I stop and orient myself.

Suddenly the screen on my RC2 goes black. I freeze up, wait for maybe 10 seconds to make sure th

Got a ThinkPad T480s, with the latest UEFI update and Debian 12.6 with GNOME on a LUKS-encrypted drive. If I leave it alone for 5 minutes, the screen fades to black and the machine hard shuts down. Like, within a second of the screen going black.

I've tried Ubuntu, Manjaro, Arch, Fedora, they all do fine, it's "only" Debian that can't. Anyone got any tips for diagnosing and hopefully fixing this?

Let's see if I can get you all you need to help me fix this:

I have a Lenovo ThinkPad T480s with Debian 12.6 on in, installed on encrypted LVM. Every time the screen fades out and the laptop is supposed to suspend, it just instantly shuts down instead. When I hit the power-button to "wake up", I'm greeted with the UEFI boot-screen.

I tried sysctl suspend and that does exactly the same.

The UEFI is the latest version, I've looked through the EUFI for any suspend-related features and found none, everything is up to date on the machine. Tried a clean install of Debian, and it still did the same without any extra software installed.

I'm at a loss here, so any help is most welcome!

I was doing some filming while on holiday, and wanted to use the Master Shot mode a bit. It was set to the default "4k/30 auto" setting and I didn't feel I had time to fully set up everything, so I just switched to 60 fps and recorded what I wanted. Worked great!

Then I come home and I decide to take 5 minutes to get everything set up the way I want it ... and find that I can't change recording settings unless the drone is airborne? Same with Quick Shot mode...

I mean, I understand that I can't start a Master Shot move while on the ground, props still, but I don't see why I can't make changes to the recording settings.

So I have an Air 3. I love it. But I've hit one issue that bugs me when I'm out hiking: it needs a decent amount of flat, clear ground to land. This can be pretty limiting when I'm out where the tufts of grass are dense and half-way up my shins, and the ground is soggy.

From what I've seen, the Air 3 can be caught after it has started the auto-land process, but that still requires flat ground to engage.

So I'm playing with the idea of a smaller drone for when the terrain simply isn't suited for launching the Air 3.

And before you suggest a landing-pad, I have one, but the terrain is just too uneven to use one.

Took a breather during a hike, saw a nice waterfall disappearing into a forest. Set up my Air 3, took off, got in position, swiped the area of interest on the screen, gentle slide right, engage autopilot, record video, let drone do its thing for a minute. And then I didn't need to watch the screen, other than to verify it was focused on the right area, but could keep my eyes on the drone instead.

Thanks for making things easy, u/dji_support!

(I know there is no video attached. I'm on vacation, and I didn't bring a PC with Resolve. The flair-selection in this sub is too restrictive. Should include "Praise"...)

Had a look at our rhubarb patch last week, needed another week, came back to harvest today, and half of the patch was consumed by these bastards (the leaves, not the stalks)

What can I use to get rid of the infestation now, and is there something I can co-plant to keep them away? I'm trying to not use pesticides...

The summary: I have a UDM Pro, I've set up a WG service on the UDM, IP group for all VPN clients to let them into my private network, with accompanying firewall rules.

Made a WG client for my phone, works great. Made another for my Debian laptop, doesn't work. I used nmcli to import the profile I downloaded from the UDM, but it seems to never connect with the UDM WG-service.

Any pointers?

I know this can work, because I had it working on this laptop before (needed to re-format, forgot to copy out profile, so I made a new one).