GrotesqueHumanity

Noticed it was available on Nintendo's store, went to Amazon and there it was also.

​

Get it while it's hot...

Just noticed this, might be related to most recent update. Or not. I have also replaced my NIC today, ight be related. Or not.

Anyway console is broken, it shows a bunch of ipv6 addresses, which offsets whatever I try to show. I've tried disabling ipv6 altogether in advanced settings but docker doesn't care and still set up ipv6 networks, which the console seems to be picking up.

Halp?

Thought I'd share the prettiness. Those are all custom apps deployed via yaml.

Need to edit /mnt/.ix-apps/metadata.yaml (global file) and /mnt/.ix-apps/app_configs/{app_name}/metadata.yaml (for each app).

Hello,

I have read that restic ignores the --no-lock flag during backup tasks and would like to know if anyone has a workaround for that. I'm trying to design a solution that uses restic to backup data to a s3 bucket with compliance lock enabled.

Any thoughts will be appreciated

Hey all,

I'm working on upgrading my cluster. Current setup is 3x Proxmox 8.4.1, running Ceph 19.2.2 Squid. Upgraded Ceph this morning going 17->18->19. Everything green on that front.

When I run the pre-check for Proxmox9 upgrade I get this error :

FAIL: The Ceph configuration of the following externally managed RBD storages needs to be updated:

ceph-rbd-pool1

I can't find any details that would allow me to understand what exactly needs to be updated or how. Only thing I could find was looking at keyring, which was properly set.

Anyone got ideas on how to proceed next?

Hello! I'm in the process of migrating from pfSense to OPNsense and am facing an issue with DHCP.

I can enable DHCP on the VLANs I have created but can't find a way to configure a scope for default LAN (192.168.1.0/24). Is it an unavailable feature? LAN is simply not listed in Services/ISC DHCPv4.

I had it working on pfSense and would like to replicate the same network behavior.

Hey everyone, I've not been able to find anything recent about Truenas support for P and E cores.

I wonder how things would go on, say, an i5-14400.

I'm specifically looking at an intel CPU to make things easier for Plex transcode.

Halp! I'm stumped, what's the condition to be allowed to research their workhole?

First time I did the war I was able to after clearing all the sectors they owned, but ran out of time to finish their own sectors.

I reloaded, did my conquest much faster, but wasn't able to research it even if I cleaned up everything. Ended up in Statu Quo again becaue obviously.

Hello!

I'm looking for infos on how I'd be able to configure opnsense in HA, especially considering pppoe limitations.

I'm looking at 2 instances, either running baremetal or on proxmox, still tbd.

I will be connecting the instances to the ONT to establish a pppoe connection. Thing is, I can only have one pppoe session at a time, so what I need to know is, if it's possible to have the backup instance of opnsense establish the pppoe session only is the primary firewall dies.

I'm looking for a 4g/5g modem to provide cellular backup if fiber fails.

Has to support band 17, which seems extremely uncommon for that type of equipment.

Found this one but open to any suggestions...

Hello!

I can't find how to do that, hoping someone will be able to help.

I would like to have permament data hosted on CEPH that would be used by a Ubuntu VM that can be destroyed and recreated at any time.

Setup is 3 node cluster running Proxmox 8.3.2 with CEPH configured.

VM is Ubuntu 24.04

I'd prefer mounting the drive from Proxmox CLI but I guess mounting it from Ubuntu would also work.

Everything is done through Ansible, if that can influence recommendations.

I can't find how to create anything on my CEPH drive, let alone mount it to the VM.

Thanks for any help...

I haven't seen anything, does anyone have something that works?