ItsThatDamnDuckAgain

Hey guys, wondering if anyone with an ND w/the mx5 things roof controller is having a similar issue.

I finally got around to taking the car in to have the passenger airbag recall done. On the drive home I tired opening the roof at above 6mph (which the mx5 thing module bypasses) but was getting the over speed warning and the roof wouldn't open.

Everything else from the module seems to work fine (one touch operation and opening/closing with the fob).

Not sure if I need to update the module or something? Just seeing if anyone else encountered this and fixed it before I go down the rabbit hole ​

Got an interesting issue, not sure if anyone else has experienced this my driver side power folding mirror collapses all the way in when you lock the car, but the passenger side one only goes about halfway but I'm able to push it the rest of the way. When I push on the mirror the mirror feels loose, whereas the drivers one feels like it's set on some kind of a track or gear and won't move by hand. ​​​​​​​​​​​​​​

Found a cheap P2S with 600hrs on it. Seller claims they're getting the Z axis homing failed error. ​They said they replaced the eddy sensor cable already and still getting the issue.

They're asking 300.

Worth taking a shot at it? Or pass?

I'm trying to take advantage of the anniversary sale and stock up on some filament.

The brown that I use normally is the polymaker Earth Brown. Anyone have an idea or experience with either the basic or matte Bambu PLAs that could tell me which is similar? I'm leaning towards the matte dark brown or the cocoa brown.

Trying to avoid red toned brown

Essentially the buyer broke the item they ordered, they claim it was damaged during shipping, but I wrap the item in bubble wrap, place it inside a specifically designed travel case, which is then bubble wrapped again and then put in a box. ​

I've asked the buyer to send images of the broken item and it's essentially snapped in 3 places. Not something that can be caused during shipping. (ive literally damage tested my items and the only way to get to the damage the seller did, would be by either yeeting the item across the room or stepping on it.)

I've asked for pics of both the shipping box and the travel case. Ofcourse they threw those away and can't provide pics. (mind you, the travel

I'm looking at potentially picking up an h2c to help shave down on print time, from my understanding is that you cannot use the .2 and . 4​ nozzle in the same print. But what isn't clear and maybe someone that has one could answer for me.

If I print by object instead of by layer. Could it be feasible to have the project I need print object 1 using nozzle .4​ and then the other object be done at .2​.

The two objects use different colors, it would be more convenient to just print all the parts I need in one session. If that makes sense? ​​

I'm looking at picking up a Mk8.5 GTI and can't seem to find an answer on this.

For the memory seats, do the side mirrors also retain memory and auto adjust?

And

Is it possible to link each seat position to a given keyfob?

https://preview.redd.it/9woabcskr2kg1.jpg?width=1902&format=pjpg&auto=webp&s=3f4546c98ced5adc98d7cc6dd0fe7e5e318ef219

Hey guys, looking for some insight for if this is possible? Im trying to make garden stakes and I'm trying to keep the part that goes into the ground constant (blue text area). Instead of constantly adjusting the length of the stake with each different word (ie: If i extrude the word Watermelon its going to run futher along the stake, taking away the amount that would go in the ground), is there a way to have the "end" of the stake adjust dependent on the last letter extruded?