KrishanuAR

u/KrishanuAR


r/hermesagent•

Keeping AI Agent Memory Accurate?

Workflow — Daily habits, multi-agent setups, best practices

I've been trying to use Hermes for work lately (they sure don’t make things easy for enterprise users…).

Hermes+Hindsight+LLM Wiki on Opus 5 (high) primarily for knowledge work.

The biggest issue is that the agent often makes mistakes which propagate in longer sessions—and while it’s easy enough to steer the session back on track, Hindsight, the markdown wiki, memory.md, and skills end up internalizing a lot of bad information that poisons future sessions.

This is correctable with directly prompted retros and memory audits, but it burns a ton of time and tokens.

Does anyone have workflow solutions for issues like this? Or do I just need to accept this as the state of things for the momen

1418

r/3Dprinting•

The tool changer for my printer should be arriving any week now, and in anticipation I’m want to buy soluble supports.

BVOH seems like the material that would best with what I usually print with (PETG, PLA, PCTG, PC, ASA)

But Amazon prices are highway robbery ($200 for 500g)

Does anyone have suggestions on where or what to get in terms of soluble supports in the US, and how your experiences with it were?

19

r/prusa3d•

I got in with the INDX founders--as soon as I got the email from Bondtech what feels like a month ago(?), I put in my order and it went through.

But it seems like it has been radio silence. No email updates no news from Prusa. When are we expected to actually get these things?

Apologies if this was in the copy somewhere--I just remember how painfully slow the pages were all loading with everyone DDOSing the systems, so I perhaps didn't read everything very carefully.

6076

r/IphoneAir•

Does anyone have suggestions for a case or bumper that has a slot to tie a wrist strap or lanyard?

I was hoping to stay as close to the iPhone Air’s natural form factor as possible, but with the ability to have it hang from the wrist with a strap…

Don’t care about protection—if it weren’t for the lack of lanyard I’d probably want to use the phone with no case

13

r/prusa3d•

Hey all!

I’m using PrusaSlicer to set up 2 virtual extruders on my Core ONE (no MMU) for layer-based color changes. This lets me apply different filament profiles per color and even mix colors in one layer (with some manual tweaks). I do it by overriding the Tool change G-code with:

M600 G1 E0.3 F1500 ; prime after color change

This treats every tool change like a real filament swap, and it works great mid-print.

But two issues:

  1. The G-code header lists filament = PLA, PLA (or similar), so the printer warns about the “wrong” type since only one filament is loaded.

  2. Bigger problem: Even if the first layers use the default extruder (T0), after warmup, ABL, and the initial priming lin

11

r/prusa3d•

Is it just me, or does the filament change logic on the Core One seem off? When I select Change Filament, it loads the new filament and purges… at the melting temperature of the second filament.

Shouldn’t the purge run at the max of the two melt temps instead? (That would just mean storing the last filament’s melt temp somewhere.)

Example: today I loaded PLA after unloading ASA-CF. Even after purging twice, I still saw ASA-CF remnants in the PLA print. If the purge had run at 270 °C instead of 215 °C, I suspect it would’ve cleared in one go.

This feels like a step back from the MK3S, where I could just set the temp manually and load at whatever temp I wanted. On the Core One, I either

207



I just finished listening to Wit’s Dog and the Dragon story in Rhythm of War, and the themes around “what makes someone truly what they are” and the tension between self-identity versus external perception really struck me as deliberate commentary on trans identity and ideology.

Did anyone else read it this way? Do you think Sanderson was intentionally making commentary on trans issues through this story?​​​​​​​​​​​​​​​​

015

r/prusa3d•

Just a heads-up based on my experience printing my first roll of Prusa PC-CF on a factory-assembled Prusa Core ONE using the default PrusaSlicer profile.

I enabled the door sensor and noticed my print kept unexpectedly pausing. Upon inspection, the top of the printer door was hanging slightly open, pushed out by the sensor. Initially, I suspected warping, but closer inspection revealed the magnet holding the door was significantly weaker.

Turns out, consumer-grade neodymium magnets lose magnetic strength reversibly at higher temperatures (and irreversible at even higher temps, but not a likely concern for this context)—a fact I'd read about but hadn't experienced firsthand until now.

Luck

5326

r/prusa3d•

Does the CORE One still have the power panic feature?

Had a brief power outage last night (<1min) and my print did not pause. (When I came and checked 2 hrs later, the heaters had cooled, and the print head was on the print, no options to resume, just the main menu).

Is the feature there? Does it have to be configured somehow?

Additional note, not sure if it may have affected it: I have the printer plugged into an eve smart plug (rated for 1800W, 15A).

Based on the answers, I guess I will know if I have to buy a UPS (600va?) to plug the printer into…

416