NomDrop

It’s a 16yo whirlpool gsf26c4exy

Last night, I noticed the freezer was not very cold. I threw a thermometer in there and kept track, it was only getting down to around 20F before going back up.

I vacuumed the condenser, then checked the evap coils. All looked good, evap coils had thin even layer of frost. While doing all that I thought I discovered the problem, the thermistor somehow got knocked and the wires were broken.

I stripped them back, spliced it back together, and it started working great. I thought everything was solved until it got down to about 9F and wouldn’t go any lower. It’s set at -3F.

Now I’m out of ideas, I thought for sure that would be it. Is there anything else I

This post contains content not supported on old Reddit. Click here to view the full post

I’m making a stand as a gift and need the diameter of the foot (as in the flat part on the bottom). I can only find the width at the widest point published. Customer service told me the measurement is proprietary.

I don’t need millimeter precision or anything, any kind of ruler or tape measure is fine and would be very helpful.

The house next door was sold recently. I live in a dense city so backyard trees aren’t super common. They had tons of maple and ash that made a nice canopy over our backyard and drew a lot of birds. I loved having leaves above our head and the view from the bedroom window felt like being in a forest.

They just had the whole yard completely cleared, they didn’t leave anything. It wasn’t my property and I know there’s nothing to be done, it just really bums me out. It looks so sad out there now, I don’t even want to look anymore. It sucks getting so used to trees you have no control over.

I’ve got myself at a crossroads with my ‘04 Toyota Sienna. Planned on doing an ATF drain and refill, but the hex socket on the drain plug is rounded and stuck on pretty good.

I figure I can:

A) Invest some more time into getting it off (probably hammer and chisel next) and buy a new plug.

B) Ignore the plug, not buy a new one, and instead buy one of those manual extractor pumps and do it from up top.

Is pumping it out a subpar method? I just want to know whether or not there’s good justification to go back to messing with that beat up plug.

TL;DR: running three pickups at the same time without (significantly) sacrificing signal or tone

Background: I’m in the process of building an as of now unnamed instrument, not a guitar but it uses enough guitar tech that I thought folks here might be able to help me out.

It has three main components (steel tines, guitar strings, and springs) that each have their own passive mag pickups. My goal is to be able to use all pickups at the same time while blending various volumes of each.

The problem: The simplest interface in my mind was three volume pots, one for each pickup. I tried out running them parallel to see if it was acceptable, but it’s just not going to work. Each pickup sounds

TL;DR: running three pickups at the same time, without (significantly) sacrificing signal or tone when blending

Background: I’m in the process of building an as of now unnamed instrument, not a guitar but it uses enough guitar tech that I thought folks here might be able to help me out.

It has three main components (steel tines, guitar strings, and springs) that each have their own passive mag pickups. My goal is to be able to use all pickups at the same time while blending various volumes of each.

The problem: The simplest interface in my mind was three volume pots, one for each pickup. I tried out running them parallel to see if it was acceptable, but it’s just not going to work. Eac

My ~12 year old cat was diagnosed with hyperthyroidism and started methimazole exactly two weeks ago. She gets 2.5mg twice daily.

She started out very underweight at 6lbs 6oz (she was about 8 1/2lbs at her peak healthy weight). In these last two weeks she’s gone up to 6lbs 14oz. Every day I weigh her, she is heavier than the last time.

I’m very happy to see the numbers going the right direction, but I’m not sure if it’s too fast? I’m just providing her with as much of whatever foods she likes right now, she’s free fed her whole life. Should I be doing anything differently?

She gets her first follow up blood test on Friday.

I’ve started canoeing this summer and it’s been mostly great. I’m in Chicago and so far have only been on the Chicago river. By my house there’s a good stretch that’s very calm and peaceful, I haven’t even seen a single power boat there.

I’d like to go more downtown but I’m having trouble dealing with the power boat wake when I start to go through the more trafficked areas. Especially where it gets narrower, even if I manage the initial wake ok, the reflections off the walls seem to get worse and worse, it feels like getting tossed around at sea. We end up just turning back. These are just from regular boats and little yachts going slowly, I can only imagine it will be even worse when I ge