NumberOneSilver

u/NumberOneSilver



r/cscareerquestions•

Hello! I will avoid the sob story (but rest assured I have one) and get right into it. I'm looking for advice on what I should do, because I'm feeling very lost.

My redacted resume is here:

https://ibb.co/KjwX2fQG

Or if you want a more subjective summary:

  • I am an ex-mechanical engineer (graduated with a bachelors in 2016) who tried to transition into Software Engineering in 2020 after layoffs
  • Got a job as an RPA Developer with only freelance/hobbyist experience starting from 2022-2024. Laid off again.
  • Convinced by my career mentors (who are very high up in the industry) to start a Software Engineering masters late 2024, and finished it dec 2025.
  • Masters was not difficult in the s
15

r/Katy•

I'm not new to Katy but I've recently restarted playing chess as a hobby. I used to play a lot in high school/college but haven't touched it for a long time. On Chess.com I stabilized around 800 ELO, so I am still beginner level for a hobbyist.

I thought it might be fun to meet up at one of the gazillion coffee/boba/tea shops and play a few games if anyone is interested.

95

r/PcBuildHelp•

My PC is performing fine, but I'm finally getting to the point where I can upgrade, and I do run into slowdowns here and there (I run lots of 3D modeling/rendering tools and gamemaking stuff that almost always gets dicey). I'm wondering whether I should upgrade the build (and in which ways I should upgrade) or if I wouldn't lose out too much by starting from scratch on a new one. I have a nephew that's very into PC gaming and I'm considering just letting him have mine and starting anew, if costs aren't too prohibitive.

So I guess the questions I'm trying to get answered are these:

  1. Is now a good time to buy PC parts, cost wise?
  2. Does my build have any obvious points of upgrade that wo
15

r/PAX•

I thought I'd ask on this subreddit since the PAX community has always been so nice online and I'm having a hard time deciding.

I just can't decide whether I want to make the trip to East. I've never been to PAX East, and I've always wanted to try it, but the schedule and the offering of games this year doesn't really strike me, and though I'd love to make friends interested in game dev or games in general, my experience trying to make friends at PAX has always been negative.

I've been to PAX West 5 times and PAX South 3 times, so I'm definitely a fan, and five of those eight times were solo. Normally the way I do the con solo is by having a goal to see every panel I'm into and play ever

211

r/limerence•

Hello. I have had limerent episodes since around middle school. I think both being bullied/outcast and being from a somewhat affectionless household made it very easy to develop in me.

Previously in the past I have been able to get into relationships, and for me at least, almost immediately when I got into the relationship, the limerence disappeared. It may be stupid, but when I get into a relationship I put a lot of effort into trusting my partner implicitly-- they've committed to the relationship, which is enough reassurance for me that they (are willing to make an effort to) love me.

I can look back through my life and pick out very clearly what were limerent episodes and what were jus

111

r/hobbycnc•

Hello! I've always been around makerspaces doing 3D printing and laser cutting and vinyl cutting, so I'm very familiar with other types of fabrication, but I've never dabbled directly with CNC before.

I want to make a friend a birthday present like this project by Stringer Guitars: https://www.instagram.com/reel/CZNplWGFguq/

I want to do the same type of project but with my own vector. It seems doable, but I know projects like these can be deceptively involved. I have the vector prepared, and the goal specs (1 inch thick wood, roughly 1 foot by 1 foot), but I am not sure on a few things.

  1. What kind of wood should I be using? Looking at the options is kind of daunting. I don't need this
16

r/houston•

Hello! I used to use the makerspaces through the Houston Public Library in the Southeast side of town, but after moving closer to the Katy area, I'm finding it very hard to find somewhere I can use a Desktop CNC machine without having to spend a lot on a membership.

I mostly stick to other methods of fabrication, so I was hoping to find someplace I can just pay to use once.

I just want to cut out a piece of wood (roughly 1inch tall, 8 inch by 8 inch) into the shape of a vector I have, then hollow out part of the center with the same vector (roughly 1/2 inch deep). Then I want to cut out a piece of 1/2 inch tall corkboard in the same shape.

Does anyone know of any place I can do this or g

10

r/OnePieceTCG•

Hello!

I am collaborating with a popular card store local to me to start running One Piece tournaments, but I had a lot of questions and the instructions confuse me a bit.

  1. How does the store get tournament kits? The store has already been registered/accepted by Bandai, it's listed on TCG+ and we've gotten the approval. I read in other topics that it's through their distributor, but what specifically do they need to ask for, and how do they verify they are allowed? My contact seems to be most confused on this part.
  2. What's the smallest size tournament you can run? The card shop has a lot of space but we were thinking about starting small and scaling up after gauging interest.
  3. Other
10

r/buildapc•

I am visiting a friend soon who would like me to help them upgrade their build. They received the parts listed below from a mutual friend, and added their own power supply, which to my understanding was more than enough to power their build.

He has been having trouble playing the latest games on anything but low, which surprised me given that he had a 2060. My assumption is that the CPU is limiting his performance, and that upgrading it would allow him to raise it by quite a bit. He says in task manager that his CPU is almost always hitting 100% utilization.

I have built a few computers before, but at this point it was around 8-9 years ago, so I'm really rusty and unsure of my own advice.

117

r/MonsterHunter•

I don't mind when NPCs are talking about things unique to the quests, but it is absolutely killing my enjoyment to have master utsushi say "you need to use a potion!" or "you need to sharpen your weapon!" when I already know how to play the game. They even say "the monster is ready to be captured" when the monsters are below the capture limit. I hate that. I don't mind it being an option for people who don't like it, but I liked having to track whether the monster was hurt and limping myself, without someone pointing it out for me. If Master Utsushi doesn't point it out, my palico will. Even then, I wouldn't mind it so much if they didn't print the big "PRESS R TO OPEN ITEM BAR" in the cente

43

r/gamemaker•

I am trying to make a board game style game with free movement; the kind where you can choose to move up-left-right-down at each individual space.

The way I am going about this is by making multiple instances of a "space" location, and moving the sprite to the location from the old space to the new space. I am storing all these locations in a 2D array that I will reference by using the player's location ID, which will change as they move.

For example, the location array looks like this.

Locations[0,0] = inst_1.x //Location of space 1
Locations[0,1] = inst_1.y
Locations[1,0] = inst_2.x ////Location of space 2
Locations[1,1] = inst_2.y    

And then after that, using a 1D

16

r/gamemaker•

Hello all. I am using Gamemaker Studio 2.2.5.481. I am trying to follow along to Shaun Spaulding's platformer tutorial, currently on episode 2 about movement and animation.

I have followed along exactly to his tutorial, but wanted to expand on what he has in order to see if I've understood how to use the code correctly.

My player object has the following in the create step:

hsp = 0;
vsp = 0;
grv = 0.3;
walksp = 4;
jump_number = 2;
jump_current = 0;
                

The sprites all work and play as intended, but for some reason the double jump sprite will only play its first frame.

The relevant animation code is h

29


r/ACTrade•

Hey! Just looking to get some fishing done and thought this would make things easier. Let me know how many stacks you want to trade and I'll send you a dodo code.

10