u/Obvcop
So playing as Sardina-Piedmont, I have a current active revolution suppored by one of the listed interest groups.
At this point I am expecting the event to trigger and my goverment to be ousted in a coup as everything I read online suggests.
Instead the revolution triggers (with a tiny number of troops) then gets defeated. If I switch sides I can't get anyone to back me and the netherlands joins in for the goverment.
Is there something I am doing wrong here
I've been lucky enough to be offered a 6700XT at retail price from a friend, but I can't for the life of me find any info online about waterblocks for this card? It's the powercolor card but I can't find info about any 6700 blocks. Does anyone know if they share a PCB with the other 6XXX cards?
So I bought 2 x 8gb crucial ballitix 3600mhz ram to upgrade my computer from some similar micron ballistix sport 2400mhz. After installing the new ram I was able to boot into the bios and attempt to set the DOCP settings from the ram, it tried to post with these settings but was unable to and booted with 2666 jdec timings, I tried a few more times with different speeds then gave up and booted it at 2666. After using windows for about an hour I wrote down some timings and settings I wanted to try and shut down . Then I powered her up again so I could try some new settings in the bios, wouldn't even POST. Got stuck on post code b0 and wouldn't go past it.
I tried the safe boot button which re
Had to repost this because of the automod
Has anyone on reddit tested the performance hit on Vega cards when the DXR option is used?
One user on guru3d seems to have gotten the option to work on Vega with mixed results
Just wondering really what the performance hit would be on AMD cards and if they are even capable of running ray tracing effects via DXR
Hey, I ordered a fuzz face clone PCB from fuzzdogs and succesfully assembled it today. I used 2n1306's for the trannies since I had them lying around and the build guide from fuzzdogs said to use NPN trannies I only had to switch the polarity of the elec's. The pedal itself seems to work fine, LED comes on, bypass is fine and volume of the pedal engaged is what I would expect.
My main disapointment seems to be the lack of fuzz, I have included a clip recorded into my mbox and guitar rig 5 (bypassed,vol full fuzz 0,vol full fuz full) so you can hear what i mean but I was really expecting a bit more grit and fuzz. One thing I have noticed is that I have wired the pots wrong but the only pro
So my friend gave me a portable speaker which I prompty decided to rip open and pry inside. Upon getting the PCB out I see it uses a TDA2822m IC with a 3V power supply and two tiny 8OHM speakers. is it possible to convert this to a portable guitar amp with a switchable headphone jack or use the inbuilt speakers? I;ve attatched pictures of the PCB and what I think is the current wiring for it. It has a stereo input as well but would it be possible to just wire the L and R inputs into the one input coming from my guitar lead (mono 1/4 jack). Would I need to use some sort of pedal in front of it since its expecting a signal from an mp3 player not a guitar? What about the power supply as well, w
This is my second attempt at building one of these pcbs (fuzz dogs foxtone clone) Before I even wired it for sound I was getting continuity with ground on several spots (nearly all) including input/output 1/2 and the volume pot plus tone pot. I can't figure out with a light and magnifying glass how this is grounding, no obvious solder bridges and cold joints wouldn't cause this sort of problem right? Some of the capacitors I pulled from my previous attempt at this pcb, is it possible that a damaged capacitor is causing continuity with ground? I've attached pictures if anybody has any thoughts. I've wired it all without the jacks and footswitch the now to remove possible vectors for er
Hey guys, l really need some advice here. I've just finished building my second ever pedal (fuzz dogs foxtone clone) but I can't seem to get any sound out of it whatsoever. This pedal is also wired True bypass but I'm not getting any sound whilst either footswich is on/off so I have a feeling it might be something up with the footswitch daughter board.. I have a basic cheap multimeter I can use but I have no idea what to check to find out the problem.
here is the schematics: http://pedalparts.co.uk/docs/UltimatumFuzz.pdf
I've attached pictures and one of the leds that is missing I was just replacing with a different colour at the time. Fuzz https://imgur.com/gallery/9Yqo2
So I have a FX55-b supra distortion with the old style 3.5mm jack power connector (tip positive)
https://imgur.com/a/FwozG https://imgur.com/a/t23u3
Rather than use a connector/adaptor cable I'm wondering if it is possible to rewire it with a boss style 2.1mm barrel style. I've attached pictures of both the barrel terminal I have and the original jack with wires. Yellow is going to 9V and red is going to the battery for switching. I basically need to know if what I want to do is possible and what terminals I would need to wire everything to. I also have a cable for my power supply that switches to centre negative if you think I would need to wire it up that way. (can do either)
I've been unable ot login into my hansa account for well over a week now. Registration is back open but even if I make a new account I still can't login. It just redirects me to the title page. Anyone else having this problem? I'm pretty desperate at this point to place an order...
