Hi everyone,
I offered to help a friend running a small guest lodge with her internet setup as they're on a 2 Gbps line, but every device connected to it over WiFi only reaches around 20-30 Mbps.
I confirmed that the line itself was okay by doing a speedtest directly off the router (Calix GigaCenter), so the problem's definitely with the setup. The Calix is connected to a Duxbury Gigabit switch, going into a MikroTik hEX PoE, then finally into a MikroTik wAP R access point which seems to be the cause of the bottleneck as it has an old 10/100 ethernet port.
I'm not entirely useless with hardware, but programming's more my thing so I wanted to get some feedback before I go out and buy some
