PalatableRadish

u/PalatableRadish


r/bikewrench•

Has anyone had experience with ZTTO, particularly bottom brackets?

​

I've got a Rotor crankset with 30mm spindle and a BSA frame. The only affordable BSA30 bottom brackets are from ZTTO at £15, otherwise it's about £50 for a steel one from Rotor or £150 for ceramic.

39


r/bikewrench•

I replaced my cassette today, among other things, and now the freehub is sticking when coasting. This is noticeable in the stand as well as riding.

It spins freely when not on the bike, whether or not the cassette is installed. But when I put it on the bike, the tighter the quick release is the more it doesn't want to spin freely.

I changed from 11s Shimano 105 cs-r5800 to 11s Shimano Dura ace cs-r9100, so there should be no compatibility issues.

I didn't remove the freehub or play with the axle in any way, so I can't see why I'd be missing a spacer.

Anyone got any ideas? I should probably service the freehub, but I can't see why that would be the cause here since it was working befor

10

r/bikewrench•

Hi everyone, has anyone got any advice on aftermarket jockey wheels for an RD-6800 for example?

I'm just wondering how much power I'm losing by swapping to cheap anodised coloured jockey wheels from eBay. Plus they all say 7-11 speed but that can't be right surely?

My jockey wheels need replacing either way so that's not an issue. It's just Shimano replacements vs unknown funky coloured unbranded ones.

29

r/bikewrench•

Hi, does anyone know how to identify a Shimano cassette when the info has rubbed off the lockring? It's 11-30 11 speed, either Ultegra or 105, I suspect CS-R7000 or CS-5700.

10

r/bikewrench•

Hi, I didn't think I'd be posting here but here we are.

My bike has mechanical 11 speed 105 with hydraulic discs.

In the small chainring, everything is quiet, as I'd expect, but in the large chainring it's much noisier. It's not rubbing on the front derailleur, that has been checked several times and set up according to the Shimano manual, plus I can hear when it's rubbing.

The trim works perfectly and the gear shifting is smooth and perfect every time. The chain is (fairly) clean and the noise doesn't improve after wiping and relubing.

I've fiddled with FD tension both ways, the limits are fine and so on.

After all that it's still noisy in the large chainring in all gear combos, thou

217

r/jobs•

I'm in the UK, so answers relating to there would be most helpful, but all feedback is helpful.

My role pays slightly above national minimum wage for my age, it's in automotive retail so I have ok-ish experience.

I'm looking for new jobs, in various different sectors. It needs to be part time because I'm working on a part time degree and also have a baby.

I mostly look on Indeed, because how else do I know who's hiring? Most jobs aren't listed there however, so I'm wondering where jobs are actually listed/advertised. I just can't seem to find the good ones? My colleague recently applied for a job I didn't know existed because it's not on Indeed. Where are you guys finding them?

22

r/Audi•

I know about the timing belt. It has 77k miles, some bodywork flaws and needs new seat covers but that's cosmetic. Engine runs well as far as I can tell.

I smelt fuel in the cabin recently, only when starting cold but I've just changed the fuel cap. The rubber was cracked so hopefully that will take care of that.

10




r/HolUp•

Schlong

NSFWbig dong energy🤯🎉❤️
334