Project113

Looking for 2 clone captain figs ideally from the same person preferably US based shipped. Does not need to be perfect condition and will pay accordingly.

Printer has been going strong for months no issues. Went to start a new print and the fan that cools the hot end started shutting off and starting back up for no reason. When ever it reaches the front left (as if facing the printer control screen) tried switching it with the parts cooling fan and same problem. When ever it travels from left to right it shuts down for about a 2 inch travel then starts up again.

-checked connections doesn’t seem to be pulling the cables apart or out of the motherboard. -problem just started over the weekend was fine with no changes -happens even if it’s not printing and just in cooldown.

Any advice?

Have a lock up issue with Infinite when playing with uncapped frame rates. PC specs are below, running the most up to date windows10, most current Infinite build and most up to date Nivida Drivers. If I set my frames over 120, say 165 to match my monitor it’ll crash after a few minutes, but at 120 it’ll run no problems. I don’t need to run crazy high frames but I’d like to know what’s wrong/not operating right.

Operating System: Windows 10 Home CPU: Intel Core i7-11700F 2.5GHz (4.9GHz Turbo) 8- Core 16-Thread • GPU: NVIDIA GeForce RTX 3060 Ti 8GB (Brand May Vary) Motherboard: Gigabyte B560 Motherboard • RAM: 16GB DDR4 3000MHZ (2x8GB) (XMP profile is enabled) SSD: 1TB Intel M.2 NVMe SSD C

Looking for someone or some service that can custom design a file for me. It’s more artistic than I am able to create. Does anyone have a service or would be able to take on a commission?

Hoping someone can shed some light on a potential problem. Have a N26 and installed a Mishimoto catch can about a year ago. Have to empty the can every 500 miles because it’ll be full of fluid. More chocolate milk than milkshake with a very small amount of oil on top but a ton of other liquid and a strong smell of fuel. I’ve pulled the codes and there are none. Oil level is always good, coolant level is good. Anyone have a clue? Or something I could check? 1 year of collecting