Pukefeast

Would any1 by chance have disassembly instructions or servicing video for Dewalt DCH481? I dont see anything online or on YouTube for this particular model for some reason. The mode selector switch is stuck and I want to disassemble it and replace whatever is messed up here. Dewalt wants $500 to service it which is way too much. Probably like a $30 part that's broken inside. I've got it almost fully apart but not sure how to pull the gears apart and dont want to ruin it

Hi all, I have built a detached sauna in my backyard and I'm considering putting in a wood burning stove to power it. Did anyone else go through the process of getting their wood stove installation WETT certified? My understanding is if the stove isn't ULC or B365 certified, a WETT technician won't certify the install. Are insurance companies not asking for WETT certifications? Please message me privately if you're more comfortable doing that. I will of course be talking to my insurance company about what their requirements are but also curious how everyone else is getting these done.

for fun: adding a pic of the build so far

Thank you!

https://preview.redd.it/eufhgdmkcrwd1.jpg?width=184

Hey guys, looking for advice/input on how to layer the moulding/trim on the MK1 windshield. Someone installed a new windshield in my mr2 a few years ago and I dont think they got the trim right. See attached pic. Can anyone share me some close up pics or something of their own car so I can see an example?

​

Also what type of adhesive should be used to keep the upper rubber piece in place along the windshield? It is coming out on one side

https://preview.redd.it/0l52af1gzotc1.jpg?width=1320&format=pjpg&auto=webp&s=bb2ca6af0c91d0ddb50989ffb7250a2b4b83fb3b

Just putting this out there in case anyone is interested: the Guelph Concert Band is putting on a show at the River Run Centre Feb 25th at 3pm. It will be a mix of comedy show and music. Our band is made up of a mix of hobbyists and students, and joining us for this show a professional Tuba player and a comedian from Guelph. Please come enjoy the show if you're interested and free that evening!

Hi all, just about to start buying models and hoping you can advise on my list before I pull the trigger. Not too worried about meta but I dont want to leave any really big gaping holes accidently as well.

-------------------------------------------------------------------------------------------------------------------------------------------

**++ Army Roster (Chaos - Thousand Sons) [7Cabal Points, 1,000pts] ++**

**Battle Size:** 1. Incursion (1000 Point limit)

**+ Epic Hero +**

**Ahriman [3Cabal Points, 130pts]:** Warlord

**+ Character +**

**Thousand Sons Sorcerer in Terminator Armour [2Cabal Points, 135pts]:** Inferno combi-bolter, Umbralefic Crysta

Hi all, I recently purchased a 1950's backsplit home. I attached a picture that seems to show some moisture and potentially salt build-up around the main drain. It looks like it switches to iron just before it enters the ground, which I assume would be original. Could anyone let me know if this is a major concern / sign of impending failure? Is this something I should pro-actively look into or wait till it fails type of issue? Thanks for any/all advice.
Imgur link to pic as I don't know how to direct add a picture :S

https://imgur.com/4sr8TJ0

Hi all, I recently purchased a 1950's backsplit home. I attached a picture that seems to show some moisture and potentially salt build-up around the main drain. It looks like it switches to iron just before it enters the ground, which I assume would be original. Could anyone let me know if this is a major concern / sign of impending failure? Is this something I should pro-actively look into or wait till it fails type of issue? Thanks for any/all advice.

Hi all, firstly, apologies if this is going into the wrong sub. Please let me know if this is the wrong place to post this. I recently purchased a 1950's backsplit home. I attached a picture that seems to show some moisture and potentially salt build-up around the main drain. It looks like it switches to iron just before it enters the ground, which I assume would be original. Could anyone let me know if this is a major concern / sign of impending failure? Is this something I should pro-actively look into or wait till it fails type of issue? Thanks for any/all advice.

Hi all,

I have a 2011 WRX. My turbo died, so I pulled it out of the car. I'd like to just replace the cartridge if possible. I live in Canada. Anyone know of a decent place to buy a replacement cartridge? I usually buy parts from Rockauto but they only carry Rotomaster and Cardone cartridges which I think are low quality brands? Anyone have experience with these: https://www.ebay.com/itm/322419530874? Would it fit the VF52? Does it come already balanced? Any and all tips regarding where to purchase would be greatly appreciated.

​

Thank you!!

The stamp reads: "Robert Vinson, Custom Made, Quincy Illinois".

There is also a small stamp on the side of it that says "JP7".

edit: https://imgur.com/a/GVJkWmg

Does anyone have any information about this mouthpiece? Has anyone here ever used one of these before? I own it and it sounds decent and works well for me, but I am just curious if anyone knows anything about it, and/or good reed pairings. I haven't made the commitment of buying a variety of reeds to see which ones work best yet. Can't seem to find any information about it online.

Thanks!

​

Hey all,

Looking to buy a used WRX and I did a cold compression test on the engine and slightly concerned with the results. One cylinder showed 119 while the others showed 130-135. Is this difference enough to be a concern? Engine was rebuilt with forged internals and has about 82,000 kms on it.

Thanks!

Hi all, I was a small time woodworker for a few years and just recently got sued for a stair install I did in 2020. This is a residential construction law question in Ontario. I don't have any friends who are familiar with legal stuff so hoping to get some advice from you all <3

A new detached home was being built, the general contractor hired a metal manufacturing facility to build a set of stairs in the house. That metal facility then hired me to build wood treads on the steel stair frame they were providing. Some months later after the install, some of the stair treads started to crack due to shrinkage from low moisture in the house in the winter. In emails, the general contractor and

Hi all, I was a small time woodworker for a few years and just recently got sued for a stair install I did in 2020. This is a residential construction law question in Ontario. I don't have any friends who are familiar with legal stuff so hoping to get some advice from you all <3

A new detached home was being built, the general contractor hired a metal manufacturing facility to build a set of stairs in the house. That metal facility then hired me to build wood treads on the steel stair frame they were providing. Some months later after the install, some of the stair treads started to crack due to shrinkage from low moisture in the house in the winter. In emails, the general contractor and