RandoInterwebUser

Title says it all. I apologize if I missed one that you were looking for but please select other and leave a comment so we can still get an idea.

I thought this might be a good idea for new developers, myself included, to get an idea of what people would like most. Obviously the most important thing is that a developer creates a story that they're interested in, but if they happened to have multiple ideas rolling around in their head this might help narrow down what they'd like to approach.

https://strawpoll.com/NoZrz0JoaZ3

I just purchased an i7-14700k a few days ago and installed it. When I went to BIOS, I noticed my XMP profile was no longer activated, I turned it on and tried to reboot. I kept getting errors saying memory overclocking failure and would bring me back to BIOS. Only way I could boot up was turning XMP off. After a couple hours of googling and trying to adjust a setting at a time, I changed the voltage from 1.29 to 1.44 and my PC was finally able to boot up with XMP and now runs at the 3600 speed. I then began lowering it and raising it to figure the minimum needed to allow the XMP profile to work and landed on 1.41.

If it matters, I don't recall the previous CPU exactly, I just know it was a

I just purchased an i7-14700k today and installed it. When I went to BIOS, I noticed my XMP profile was no longer activated, I turned it on and tried to reboot. I kept getting errors saying memory overclocking failure and bring me back to BIOS. Only way I could boot up was turning XMP off. After a couple hours of googling and trying to adjust a setting at a time, I changed the voltage from 1.29 to 1.44 and my PC was finally able to boot up with XMP and now runs at the 3600 speed.

The point of this post is basically me asking, is it okay to leave the voltage at 1.44, or should I try lowering it little by little until I figure out the bare minimum it needs? I just want to make sure I'm not r

Pretty much what the title says.

I'm soon going to be putting down click lock flooring in my home. The hardwood flooring is in pretty poor condition and my kids have gotten multiple splinters just from running around the house. Previous owner had dogs and think they must've had accidents in the house, I don't smell it, but wife claims she smells it so has mentioned maybe laying a sealant down before click locking to mask the smell (she's tried multiple cleaning attempts but with no luck).

So basically I just wanted to make sure it wouldn't cause an issue. I can't see why it would, but I'd rather be the guy asking beforehand then being the guy with a story to tell on things not to do lol

Bought 4 weeks ago. Only an hour on the system, mowed three times with it so far. I started it, mowed for about 2 minutes then turned it off for a minute to grab something and when I went to turn it on, I got nothing. Sometimes I get a single click, sometimes I get a beep and sometimes nothing. I took the battery out and brought to the shop where the tech did a load test and he said the battery is perfectly fine and that it would start up any mower. Just wondering what else could be wrong? I also changed the fuse near the battery just to try but didn’t help.

Hello, came back after couple years and even then, I didn't get much into bossing or anything but this time around I'd like to. Was wondering if you guys could give me a small list of ranged weapons that are best and what they're best for. Already have a blow pipe, wondering what else I should aim for. Intend to do a lot of slayer/bossing.

Should I buy the Enemy Within DLC right off the bat or should I beat Unknown first? Should say I've been binging the game for past 2 days, haven't gotten far though -_- (refusing to start on normal, trying to be classic non-ironman)

Hello, I'm looking into purchasing a home and one home that I like has been listed for since July and has gone from Listed - Contingent - Listed - Contingent then finally back on sale again with a price drop. I'm just curious if that raises a flag for anyone before I even view the home? It's a 3 hour drive from where I am currently so only have limited time to view houses and don't want to waste time

Hey all, been googling and nothing has really jumped out to me just yet so figured I'd make my own post.

​

Looking to make a new character and would like to go for a spear build using electrify armament. Lightning is my favorite element in general so would love to make a build of it in Elden Ring. Definitely down to use some lightning abilities as well, but would mainly like to be focused on melee combat. Still undecided between Spear + Shield or dual wielding.

​

Thanks for any suggestions.

https://ibb.co/YXdSQK0

Just built 2 computers yesterday. One for me and another for my friend. Mine is working perfectly and his was working at first after putting it together and throwing in the windows and drivers.

After he went home and started it up he started getting this screen. He apparently has some reset switch or whatever on top of his case and is able to hit it, it refreshes the screen and it goes away. Asked him to try using his MB instead of GPU but said his MB work at all so assuming his processor does not have on-board graphics.

Any ideas what could be causing this?

https://ibb.co/YXdSQK0

1 for me and 1 for my friend. Mine is working perfectly but his has that pop on his screen when he turns it out. He has some sort of reset button on top of his tower he said he is able to hit and it refreshes the screen and then works normally. Any ideas what would be causing this screen? It worked fine at my house while loading windows and drivers.

Trying to put together my PC. I got a EVGA 3080 TI that has 3 8-pin ports on it.

I got a Corsair RM850 PSU. It came with 3 EPS/ATX12V (8 pin) plugs and only 2 PCIE 6+2 cables. I was trying to plug the 8 pins in to the GPU with no success. If I have to use the PCIe plug ins I will be forced to daisy chain since I only have 2.

Am I doing something wrong or does the 8 pins that I mentioned not fit the GPU?