Because of that stuff that life throws at you, we decided that the cost of heading to Madison this week just wasn't in the cards.
Hit me up, the tickets can be yours!
u/RouterMonkey
Because of that stuff that life throws at you, we decided that the cost of heading to Madison this week just wasn't in the cards.
Hit me up, the tickets can be yours!
I currently work for a company that uses Orion for our network monitoring platform. As a directive from about, we're now looking at another SaaS type network monitoring solution. The solution seems to be far from mainstream (not going to mention by name, but HPE just bought them). There seems to be little information about anybody experience using it, but someone one of our VPs used to work with use it, and so it comes recommended and seems to be what we're going to be using soon.
We are a very heavy Grafana shop. The vast majority of our application stack and business process flow monitored with Grafana. It's seemingly the Go To solution for most of our monitoring....except for infr
Just finished building up my new Unread server and getting ready to start to migrate the dockers. I've already used rsync to move the data from old to new.
What is the best way to migrate the dockers and config? Since the appdata is sync'd, just copy of the XML files from the boot and download the images? Just looking for the best path forward w/ the least amount of hassle. As I've said, I've already rsync'd the appdata, but I see some people talk about using CA Backup / Restore Appdata to assist with the migration, is that an easier path? Could easily do a quick backup to an external drive and restore from that on the new server if that's a good route.
No drives migrating.
My company is deployed Arista and I'm running into some issues with monitoring.
I'm having issues with SNMP reporting 'bad' values on interfaces that have optics installed and are admin up, but with nothing plugged in. These interfaces report a DOM RX Power Sensor value of -100W, which results in a critical hardware alert. Is there a way to work around this besides working with the engineers to start disabling any unused ports, so the they don't result in a hardware alarm. I can also see this resulting in hardware alerts on any interface that goes down.
Monitoring using SolarWinds Orion, the switch is a DCS-7050SX3-96YC8.
I'm currently working with our engineers who are installing our new Arista gear. They've setup SNMPv3 and I've added the nodes into SolarWinds Orion. SNMP is working, but I'm not able to discover any interfaces. Same thing with all 8 nodes.
I've done some looking, but haven't found anything helpful yet. The engineers are going to reach out to Arista support, but wondered if anyone here has any tips or hints.
I've been running into an issue with my Pi-hole. CPU will run smoothly at < 1 for a while, then I'll notice pages not loading and I'll check the Pi-hole and my CPU will be 4-6. Sometimes it seems to resolve itself after a bit, other times I end up rebooting to get DNS service back up again. At first I thought it was due to running padd.sh, but I disabled that and the issues continue. Last night, DNS seemed fail @3AM and will still down this morning till I rebooted.
Puzzled and looking for some help to figure this out. Pi-hole will see 150-200 clients (both WFH, some home lab stuff, IPv6 adding some IP addresses, etc) and is running in a RPI4B.
Blah. Grabbed tickets for my birthday, but life gets in the way and I'm not going to make it to Chicago for the show.
Two tickets. Seated Balcony. They are yours, just DM me and I'll email them to you.
--Tickets gone--
Up till recently, I've been running Pihole on my unRaid server but went back to running it on an RPI. I had the RPI setup and powered down as a backup I could use when unRaid was down for any reason. Both configured with the same IP.
When I went back fulltime to the RPI, I made sure that everything was up to date. But I've been running into issues with it sort of locking up. I have a screen with PADD running, and it'll show 0 domains blocked 0 queries. The GUI will not really load (the screen comes up, spinning like it's loading data, but never loads or displays anything). Reboot resolves the issue, but in some point in the futre (12-36 hours) it'll do the same thing.
I've done
I have a Plex server with a media library of ~27GB. I've started to think about building a server for off-site backups, syncing the media directory. I started to think about where I could host this, and realized that my son would probably be more than willing to host at his house. That led me down the path of considering how feasible it would be for us to both host local Plex servers using the sync media library, but not syncing anything in Plex itself. Just the content synced, with each Plex instance running completely unaware of the other.
It seems to me that this wouldn't be a problem, but I just wanted to put this out there in case there was some gotcha I hadn't considered befor
How do I issue commands to Alexa that will invoke a Node Red flow?
Long story short, I was using HA/ND at my old house, and when I moved, I decided to try using strictly HomeKit in the new house. After about a year, I'm moving back to HA/ND, and I cannot, for the life of me, remember how I had successfully integrated them. Wife and I had a couple of voice commands (Such as "going to bed") that would trigger a flow of lights on and off with timer. But, I can't remember how I did it.
Lesson learned, archive your configs, just in case you decide to go back.
I've used Home Assistant in the past, but a year ago, I moved into a new house, and decided to give pure Homekit a try. After a year, I realize that I want to move back to HA.
The one major hurdle is I have two Mysa thermostats. As I have electric baseboard heating, that's really my only option unless I want to go toward another thermostat and using relays. So, I'm working on getting the Mysa into HA using the Homekit Controller, but am having no luck. Most of what I've read either suggests adding it using the Mysa app, then you'll see it appear in Integrations, or some say to use the Mysa app, but not complete the process, just go far enough to get it to show up in HA, the add it to
Moved into a new house recently, brought my network/PiHole along from the old house. New ISP offers IPv6, so it got enabled. I ran thru the setup utility to turn on IPv6 addressing and filtering, but it doesn't seem to be working. Now getting ads where I didn't used to.
If I can't figure out what is going on, I might just wipe the PiHole and setup from scratch to see if that resolves the issue, and if not that, just turn IPv6 back off.
Suggestions as to where to look/what to try?