SC2sam

Having to post this as reddit keeps trying to say all of the mod team is inactive. We aren't inactive at all.

Finally got time to attempt this N54L NAS build but its my first time trying to build a server from scratch. I have a single 4 tb drive in the first slot and the USB with truenas boot on it but the system doesn't ever seem to get to the install OS part. The video output is also stuck on D-sub out of range so I'm not entirely sure what its doing.

I first tried to use a pcie nvme m.2 ssd in the pcie slot so i could free up the drives strictly for storage and i had also removed the additional NIC card. The bios got cleared when we changed the CMOS battery as well. Currently I reinstalled the NIC card and its just stuck on not doing anything.

I recently got a old HP server and want to turn it into a NAS. The issue though is that its super old and I can't get any support for it anywhere. Does anyone happen to have the updated BIOS and firmware for it? I want to use 4 tb drives in it and a pcie nvme m.2 card as well for booting into TrueNAS. I tried to go through HP officially but its not available for download anymore. Any suggestions?

I'm having issues with my current setup of crestron, logitech, and biamp equipment. Everything is on a isolated network and were having time sync issues caused by the fact that there is no NTB server on the network or any way to reach one. Does anyone know how we can use the CP4N as a NTB server to fix this issue?

Server version: 1.41.5.9522

OS: Windows 10

Clients, w/ versions, if applicable: most current Plex version on chromecast with google TV 4k, not sure of it's specific version.

I've been experiencing buffering issues with certain content mostly 4k stuff. It'll play fine for 10 to 30 seconds and then buffer for a while and resume playback. It's direct play so no transcoding is going on.

I have my chromecast on a USB-C hub with a ethernet cable going into it which gives the best possible speed to the device. My server is on the same local network with 2.5 gbps port into a 2.5 gbps port on my router.

This has just started to become an issue fairly recently. I haven't really changed anything b

I noticed that the remove shorts, and change how many videos are in a row filters no longer work. The ones on here https://www.reddit.com/r/uBlockOrigin/wiki/solutions/youtube#wiki_shorts. Seems like they revamped the home screen so most things won't work the same way anymore. Anyone have any updates on the filters to get them to work again?

I'm having trouble being able to figure out what my setup is considered. 5.1? 7.1? 5.1.2? etc... I have the soundbar 900, the base module 500, and surround speakers(not the 700's). Does the soundbar itself have 5 speakers and then with the 2 rear surround speakers that would mean my system is actually 7.1?

I'm using Useac3to133 which uses ffmpeg to do the above. However, the output doesn't sound right. Like it's quieter or something. I can bring up the files in audacity and check to see if the channels are correct and they do seem to be correct. What am I doing wrong? Or is this a known issue?

Reason i'm doing it is because I have a LG tv which doesn't support DTS and I want to have the best possible audio. I've been just converting the DTS to DD+ which works great but I've heard that PCM is even better which my TV does support as does my bose sound system. However in practice though, the DD+ just sounds more balanced properly. Any suggestions?

I just bought a refurbished WD WDC WUH721816ALE6L4 but I noticed that there is an extra space between WDC and the model info WUH721816ALE6L4 so it shows up as WDC WUH721816ALE6L4 with two spaces. It's not causing any problems but for some reason it's annoying to me. I'm using windows 10

Server version: 1.32.5.7349

Windows 10

I have this one folder of music which has a significant number of sub folders in it(roughly 200 or so) and it keeps getting hung up on one of them. It never finishes scanning and I get forced to shut down plex entirely. I deleted the entire folder and re downloaded it just in case it was corrupted or something. I also deleted it from my plex and even cleared the trash folder.

What can I do to add this music to my plex and get it to stop scanning permanently?

Had to split up the logs because it kept telling me it was "offensive"

https://pastebin.com/3XVa1jwZ

https://pastebin.com/ixEAdhux

https://pastebin.com/UTksFwHq

https://pastebin.com/acRF4cT2

Hey everyone; after a drama-filled week across reddit, we decided that it would be for the best to open the sub back up and resume normal operations. The community was pretty split on the decision on when/how to reopen the sub, but it's clear that a huge amount of people just want to get back to discussing the series they love. As shitty as the admin's behavior has been, I don't want to deny everyone that joy any longer.

So, I'm making the executive decision to get the sub out of restricted mode and let users post normally starting early tomorrow.

Now, I'm sure some of you have seen the more 'creative' ways some larger subs have been protesting the changes while still staying open (John Ol

I was on my plex tonight and I noticed a user that I was not familiar with was watching content. I checked my manage library access and their name was not in the list. How is it possible that someone is able to watch content on my plex without me ever having granted them access? Here's proof of this incident and I also have logs.

edit: What's up with the downvotes?

edit2: So it turns out it's a person who I sent an invite too however they didn't accept the invite but they were able to still watch stuff on my plex. Kinda weird that they are able to do that though and it seems like a bug or flaw in plex for that to be allowed to happen.