Samdi

u/Samdi



r/Earbuds•

Just got some JBL Live Pro 2 tws, after owning some decent/ok "X08" cheap amazon buds. Great sound quality difference. Nice features like ambient aware & noise cancelling...

Bud with JBL you have to setup touch controls AKA "gestures" on the app. You can set each side to control 1 of 3 settings types... Yes 1 of 3. You have TWO earbuds and have to choose between a THREE controls.

So if I decide to wear only one side, which is most of the time, depending on the side I only get access to one type of control. And if i want both sides to control play/pause, this means having to go to the app to control the other stuff.

Total crap design. My cheapo chinese buds could control playback, and volu

11

r/kdenlive•

I am up to 10 tracks. All has been going well so far until i decided to pan the 10th audio track right, immediate crash, lost 3 hours of work.

The project total timeline length is a little over 2 hours. It is footage from 1 centered camera for a school rock concert. We asked the attendees to submit any and all videos they may have filmed during the show. Some songs only have a few videos, while others have around 8 or 9. Right now i have no effects, i am only undertaking the task of syncing all videos to the frame. So far have 20 of 25 songs done. No lag, no issues.

I plan to do some simple exposure & color correction, and simple transparency fades between videos. This is probably where

72

r/KoalaSampler•

I am trying to sequence this drum synth (external hardware) on android using a USB midi connection. Problem is this device is like two devices in one. It has two identical channels where you model a sound. Now when I use Koala(w/samurai) to control via midi out, it only controls 1 of the two oscilators (behringer calls them channels, like channels on a guitar amp, which causes confusion when refering to midi channels.

The unit has a midi channel switch in the back (ch 1 to 16). I keep it on #1. This means both sides / oscillators are controlled by 1 midi channel.

The device has two midi modes. I'm going to be refering to mode 1 for this post.

The behringer manual gives instructions on how

10




r/motorcycles•

I bought a used 2002 Suzuki GS500. I had very little experience with maintenance and did not see how the bike hadn't been maintained much through out the years. I did the basics, changed sparks, oil filter & oil, air filter, had the carbs cleaned up, changed the chain and sprockets. It runs better now except that it started making a very noticable click noise in the motor after a good half hour ride especially on hot days. I had the valves adjusted, and the timing chain is at approx 50% of its life I was told. They determined that it was most likely the valve guides gone bad and that it would cost a lot more than the bike is worth to fix this. I have no intentions of fixing this and will jus

11

r/Tools•

Is this a thing? A large enough drill chuck or attachment which is basically an all purpose object spinner? Like a 3 prong vice grip for a drill bit kind of? Spin anything from a headless screw to a whatever inch pipe.

17


r/swans•

Lots of stories of the place. But any place that is frequented for this many years should have at least a couple of pictures... Especially with artists hanging around. Of course it was very dark in there apparently, but I'd figure there would be at least a few pictures of how the outside looked back then.

And for those who don't know, it's now an Egyptian café. The only thing that supposedly remains is a spiral engraved into the sidewalk outside. Some say it was done by a local artist known for wet cement sculptures of this sort. (Sort of a big coincidence if he was not aware of Swans)

11