
Spr4ck
u/Spr4ck

Anyone recognize the logo? I can't remember the name of the manufacturer, and I want to get a second belt.
reddit.com/gallery/1sd706f
reddit.comTLDR - what's my best option for a lift pump for the laundry sink in the basement - So far it seems like there are two types - cheap ones that connect directly to the sink basin, that are not vented. more expensive versions that require venting eg saniflow?.
The pump needs to be sized to handle a washing machine - and a 75gpd RO that discharges into the laundry sink. is a 1/3hp motor enough?
I'm in the process of replacing my septic system - and due to the elevations and soil type - the whole system has to be raised - resulting in raising the elevation of the main line out from the house, it seems like some o
curious what yall are doing for broadheads? 100gr? 150? mechanicals or fixed?
a few points:
1, I'm pretty sure the comments are photoshopped, I don't recall that interaction but who knows...
2, I won't respond to chat requests related to the game because I know nothing about it.
3, Yes that's me on YouTube. I don't normally use that account for YouTube hence the recent creation time
4, I think the whole thing is hilarious.
5, Y'all seem to have a fun gaming community here, love the enthusiasm. I'm going to make a small ask: If you thought it was funny or otherwise felt the need to engage me about it Do the world a solid:
Do a random of kindness for someone - make someone's day better.
Don't post it, don't tell me or anyone else about it, just seize every oppo
The bane of solo fishing: getting that good photo of your catch, I've been thinking of mounting a camera on the forward gear track so I can snap a photo holding each catch.
A quick look shows cheap 4k/1080 go pro knockoffs on Amazon/Aliexpress. Are they garbage? do the remotes work well for photos?
Anything you wish you knew before you grabbed one?
thanks!
The bane of solo fishing: getting that good photo of your catch, I've been thinking of mounting a camera on the forward gear track so I can snap a photo holding each catch.
A quick look shows cheap 4k/1080 go pro knockoffs on Amazon/Aliexpress. Are they garbage? do the remotes work well for photos?
Anything you wish you knew before you grabbed one?
thanks!
The bane of solo fishing: getting that good photo of your catch, I've been thinking of mounting a camera on the forward gear track so I can snap a photo holding each catch.
A quick look shows cheap 4k/1080 go pro knockoffs on Amazon/Aliexpress. Are they garbage? do the remotes work well for photos?
Anything you wish you knew before you grabbed one?
thanks!
Going out with the gang on Erie tomorrow for walleye, the usual lunch spot in port burwell closed last year, so any suggestions for a good lunch in the area?
Driving in from Mississauga - so prefer closer to port burwell.
preference for local independant type restaurant - not picky on food type as long as top notch quality.
Hoping I can draw on your collective experience
I have a pedal drive kayak I use for fishing freshwater lakes and one of the issues it has due to the hull shape is it has a terrible amount leeway, the pedal unit has a small fin on it - but when I remove the pedal drive to use an electric transom mounted trolling motor, the effect is magnified as the hull shape is just too flat.
The thought that came to me this morning - I could likely fabricate a removable centerboard that uses the pedal drive mount (1/2" T track). based on the size of the hull 32" W x 125" L, and the size of the cut-out for the pedal drive (~4x12") If i were to make the centerboard use the full length of the hull
I have a riot mako versa 10' - I recently set it up with an trolling motor - fast and dirty - direct to the battery.
The OEM leads on the motor are short enough that the battery has to go behind the seat - this throws off the trim.
The Kayak is designed with a spot at the bow to mount a battery.
My thought is - install a 50A marine grade disconnect onto the hull at the bow, fish 6ga marine wire through the hull (future proofing if i ever go to a larger motor), with a disconnect at the stern - and cut the spring clamps off the motor leads and replace with the marine 2pole plug.
I'd wire in an appropriately sized breaker/fuse, and possibly even a switch panel for some addon running lights
I've got a few projects coming up where i'll be drilling a variety of holes both free hand and on the drill press through various materials (steel, stainless) and I'm fed up with the crappy quality of the HSS set I have. So with that in mind here's what I want:
Cobalt Drill bit set 1/16 - 1/2" in 1/16 increments.
What brands do you use and like? what ones do you avoid like the plague. On general principal I'll avoid anything chinesium, but sometimes its hard to know which brands are just re-branded chinesium.
thanks!

