TimAndTimi

u/TimAndTimi



r/razer•

Found my blade 16 2024 w/ 4080 started to idle with noticeably louder idle fan speed and noise.

Reopened and repasted with ptm7950, and then it boot into windows with CPU at 100c constantly. Booting into linux is better due to lower idle load, but still hovering around 70-80c when fan is already at 3500rpm.

I repasted at least anotehr 2 times and nope, the thermal paste is evenly squeezed out and no sign of insufficient contact yet it overheats.

So I boot the laptop with buttom opened and... well... the heatsink near the fin stack side is cold to touch while the CPU and GPU side is already burning hot.

So, likely a VC heatsink failure.

The unit is out of warranty and used for around 2

45

r/LocalLLM•

So I need to deploy it on a Slurm cluster I developed, though the issue being container support is still pending deployment so I need to compile the env from scratch (not the annoying part yet).

The issue is the jasl vllm fork does not seems to deliver token speed that I would expect from 2x, 4x or 8x PRO 6000.

Does anything tried compile the env from source and worked correctly and speedy on PRO 6000, what's your recipe?

56

r/LocalLLM•

Deployed w/ DSpark k=5, it is stupidly fast at 120tps peak in coding and 60-80tps for thinking and writing, yet matching GLM5.2.

Very impressive post-training improvements over the preview version.

My config and floorplan for VRAM and RAM: 1x GH200 480GB, 68GiB for HBM resident experts and DSpark draft model, 11.32GiB for KV cache, activation overhead, CUDA graph pool, etc. ~11GiB. 88GiB offlaoded to RAM (peak streaming speed at 355GiB/s from RAM to VRAM)

Intellgience: still exploring, seemingly as good as GLM5.2 but much faster. I would even argue it feels closer to opus 4.6 in fast mode.

4964

r/LocalLLM•

Disclaimer: bugs fixed are vibed with Fable/Opus/GPT5.6Sol. The server is bought from cert. vendor at a steal price as a test sample.

The specific patch applies to vllm/vllm-openai:nightly-aarch64, dev build 0.23.1rc1.dev1373.

Model weight: DeepSeek-V4-Flash / QuantTrio/GLM-5.2-Int4-Int8Mix (simply referred to as dsv4flash and glm5.2 down below)

Deployed context length: 1M for dsv4flash, and 500k for GLM5.2

Hardware spec: GH200 w/ 96GB HBM and 480GB LPDDR5x, NvLink c2c between CPU and GPU at 900GB/s (bidirectional), RAM bandwidth 384GB/s unidirectional.

Out of the box, both suffers from the same diasterous 2-5 tps decoding on the mentioned vLLM build. (fresher vLLM build exists, but I d

84

r/razer•

TLDR worst case you got -15% frame rate in games, but sometimes the frame rate can be even higher compared to windows (RDR2). So gaming turns out to be non-issue as long as you stay away from games that uses EAC, etc. (I don't play these games anyways...)

In terms of Synapse replacement, I reverse engineered the feature sets covering performance modes, manual/custom fan curve (that Synapse does not have), keyboard backlight control, battery charging limit, and also a dGPU undervolting module (better than Afterburner I think... it is becoming a bloatware also)

https://preview.redd.it/wy538ekpxn8h1.png?width=975&format=png&auto=webp&s=71f071c67fd912c493d9ceb578bb940ede058fdc

https://preview

70

r/razer•

TLDR see here: https://github.com/rnd-ash/razer-laptop-control

Comes with no warranty and Linux-only, compiled binary should be less than 100kB, virtually taking no resource from your laptop to run.

Add a bit more flavor to be able to see CPU temp, power, and GPU idle state to optimize battery life. Also comes with simple control on keyboard backlight.

If you want it support your laptop. PM to see if I have time for it, or just continue development with Codex or Claude Code. Easy, one-afternoon side quest at most.

Large thanks to Ashcon Mohseninia and repo: [https://github.com/rnd-ash/razer-laptop-control](https://github.com/rnd-ash/raze

30

r/razer•

TLDR, my blade 16 2024 w/ 14900hx is encountering stability issue recently. No thermal warning just directly blowing up at my face without even windows hardware event logging. Seems classic stability issue.

Applied the latest BIOS update that finally update the micocode, and now it seems stable again. (We'll see...)

11


r/espresso•

https://preview.redd.it/qb105mgtdslg1.jpg?width=1280&format=pjpg&auto=webp&s=d5de534de8924905a54128401600595c4edbd059

Cannot stand DF54's poor quality grinds and tired of rolling my C40 to crunch a shot, so I bought this heavy bomb shell... shipped in 2 days and spent another 3 days on the way to my home. (all Chinese domestic outlet sales and I travel overseas with it)

TLDR, it SOLVES the issue with brewing medium to light roasts with Micra (ultra light still no go since Micra does not support changing pressure very well).

The pros:

  1. Clear reduction of channeling, likely thanks to better particle distribution.
  2. Much faster grinding.
  3. The advantage is not entire about the flavor, r
159