Tpp4

Are the flying rates and power correct for the air65 freestyle? I'm sure the creators did their homework, but it handles wildly different than the other 65s I've tried (mobula6 and meteor65). The rates shown in game are way more aggressive, but maybe that's correct. I tried detuning the air65 down to similar rates on the other drones, but I didn't seem to gain any stability while only losing control. It seems that even with camera adjustment, the air65 really doesn't like to be flown <10mph. Quite new to all this but have 15+ hours in the sim with 65s. Flying rate mode exclusively BTW. Thanks

Does anyone have the updated version of this file? The github has v4 listed which apparently broke when prusaslicer updated to 2.2. I've heard of really good results when using this profile. I currently have problems with my overhangs and bridging. My fan speed is maxed and I've increased bridging speed to 40 from 25, which has helped some. Multiplier extrusion has already been calibrated, but next I will try reducing my bridging flow slightly.

So, I've just finished building my pc, but I can't seem to get my ram to run xmp (3200). If I just enable xmp, and leave it on auto in the bios, it won't post. I get the ram debug light. I turned off xmp, and it posts just fine with ram at 2400. I tried enabling xmp and manually setting the voltage to 1.35, and it posted and has remained stable. However, I downloaded cpu-z to make sure the ram was actually running at 3200, and it appears only 1 stick is running xmp. I have tried searching Google to troubleshoot, but am struggling to find another instance like my issue. I'm hoping one of you can shed some light on the situation. I have attached screenshots with

So, I've just finished building my pc, but I can't seem to get my ram to run xmp (3200). If I just enable xmp, and leave it on auto in the bios, it won't post. I get the ram debug light. I turned off xmp, and it posts just fine with ram at 2400. I tried enabling xmp and manually setting the voltage to 1.35, and it posted and has remained stable. However, I downloaded cpu-z to make sure the ram was actually running at 3200, and it appears only 1 stick is running xmp. I have tried searching Google to troubleshoot, but am struggling to find another instance like my issue. I'm hoping one of you can shed some light on the situation. I have attached screenshots with

I have searched through this thread to find my answer and have not, so I will ask it, and hopefully someone can help.

So I'm trying to decide upon which attachment method to use for mounting the cnc warrior brace to my newly acquired zastava m92 alpha. All the m92s I've seen have the brace directly mounted to the trunnion. I have yet to see one mounted to the 1913 rail. Does anyone have pics? If I were to remove the 1913 rail, would the direct mount even line up correctly? Has someone else done this? I'm looking for the buy once, cry once solution.

Gone are the days of waiting on a 100gb download for a 10 min quest. And xcloud in general is just downright amazing! That is all.